Stainless Steel Sheet Servo Cut To Length Line With Edge Trimmer
Servo Cut to length line is a production line of cutting steel coil
to length after uncoiling and leveling , composed of uncoiler
,leveler , NC length feeder , high speed servo shear , double
stackers , etc .After uncoiling , the steel sheet pass through
6high leveler , sensor controls looping , length feeder measure
sheet length and controls shear to cut sheet to set length; The
belt conveyor delivers the cut sheet to first stacker the scissor
table automatically comes down with the piled sheets height
increasing on the table , when the sheets reach set quantity, push
button on panel to switch the sheet conveying to second stacker .
Press button to let first scissor table lower to bottom , then
output roll table deliver the sheets out to operation side . This
way, one steel coil cutting is continuous without stop.
Composition
| No. | Composition | Qty |
| 1 | Coil preparation saddle | 1pair |
| 2 | Coil loading car | 1set |
| 4 | Uncoiler+Coil snubber roller + paper winder | 1set |
| 5 | 6hi leveler+ work rolls cleaner | 1set |
| 6 | Cascade roll loop1 | 1set |
| 7 | side guide | 1set |
| 8 | NC Servo feeder | |
| 9 | Dual sides film /electrostatic paper laminator | |
| 10 | Servo shear | 1set |
| 11 | convey belt + waste sheet car | 1set |
| 11 | Dual stackers | 1set |
| 12 | Output roll tables | 1set |
| 13 | Hydraulic system | 1set |
| 14 | Pneumatic system | 1set |
| 15 | Electric control system | 1set |
Parameters
0.4-3 x 1600 servo cut to length line
Input materials:
| No. | Item | Parameters |
| 1 | Material | HR,CR, GI steel |
| Stainless steel below 1.5mm |
| 2 | coil plate thickness | 0.4-3.0mm |
|
| 3 | Coil plate width | 300- 1600mm |
|
| 4 | Coil outer diameter | ≤Φ2000mm |
|
| 5 | Coil inner diameter | Φ508mm Φ610mm |
|
| 6 | Max coil weight | 25T |
|
| 7 | Mechanic properties | Mild steel, |
| Yield strength σb≤350N/mm2 Tensile strength σs≤550N/mm2 |
| Yield strength σb≤510N/mm2 Tensile strength σs≤780N/mm2 |
Machine performance:
| No. | Item | Parameters | |
| 1 | Cutting length | Stacker1, 300-3000mm/ stacker2, 400-6000mm | |
| 2 | Cutting length tolerance | L=2m≤±0.3mm(2.0mm) | |
| 3 | Diagonal length tolerance | L=2m≤±0.5mm(2.0mm) | |
| 4 | leveling precision | ≤±1.2mm/m2 | |
| |
| 5 | Stacking height | Include cushion wood 700mm, max 5T. | |
| 6 | .Cutting burrs | Thickness ≤1 . 0mm , ≤0 . 03mm | |
| Above 1 . 0mm , burrs ≤ 3% of thickness | |
| 7 | Stacking precision | Deviation between layers: ≤1.0mm in width, ≤1.5mm in length | |
| Deviation in stacking height ＜3mm for 500mm height | |
| 8 | Cutting speed | 0-60m/min | |
| Sheet length(mm) | cutting times(pcs/min) |
| 1000mm | 50pcs |
| 2000mm | 30pcs |
| 3000mm | 20pcs |
| 4000mm | 15pcs |
| 6000mm | 10pcs |
| 9 | Total power | about 240KW | |
