ASME B16.20 SS316 Spiral Wound Gasket Graphite Filled High Pressure Seal Ring

5. Product Functions

• Creates a positive, leak-tight seal between two flange faces under bolted joint compression

• Compensates for flange surface irregularities, minor misalignments, and thermal expansion differences

• Prevents escape of hazardous, corrosive, or high-value fluids and gases

• Provides electrical isolation where required

• Enables easy assembly, disassembly, and maintenance of flange joints

• Inner ring functions as a compression limiter to prevent gasket crushing and prolong service life

6. Instruction for Use

1. Inspect Flange Faces: Ensure flange surfaces are clean, smooth, and free from scratches, rust, or debris. Inspect for any damage that may affect sealing.

2. Select Correct Size: Verify the gasket dimensions match the flange rating, size, and face type.

3. Position the Gasket: Center the gasket between the flange faces, ensuring the inner ring aligns properly with the flange bore.

4. Tighten Bolts Evenly: Apply lubricant to stud bolts and nuts. Tighten in a star pattern in at least three incremental steps (typically 30%, 60%, and 100% of target torque) to ensure uniform compression.

5. Achieve Proper Compression: Maintain the recommended compression rate of 25%-35% to ensure optimal sealing performance.

6. Final Torque Check: After reaching operating temperature and pressure, re-torque bolts if required by the plant procedure.

7. Precautions

• Do not exceed the recommended bolt torque, as over-compression can damage the winding and reduce rebound performance.

• Ensure the gasket is compatible with the service media to avoid chemical attack (refer to chemical compatibility chart).

• Do not reuse removed gaskets; once compressed, the gasket may not recover fully and could compromise seal integrity.

• Store in a dry, cool, and clean environment, away from direct sunlight, oil, and chemicals.

• Handle with care to avoid bending or denting the winding rings before installation.

• For hazardous or high-risk applications, always follow site-specific safety and installation procedures.

8. Shipping Information

• Lead Time: 15-30 working days after order confirmation, depending on order quantity and size complexity.

• Shipping Methods: By sea, air, or express (DHL, FedEx, UPS) as per customer requirement.

• Tracking: Shipment tracking information will be provided within 24 hours after dispatch.

• Delivery Responsibility: All deliveries are subject to shipping terms (EXW, FOB, CIF, etc.) agreed at the time of order.

9. Payment Terms

• Minimum Order Quantity (MOQ): 1 PC (samples and small orders welcome)

• Price: Negotiable based on quantity, size, and specification

10. Packaging

Standard export packaging is used to ensure product integrity during transit:

• Each gasket is individually wrapped with protective film or anti-rust paper to prevent scratches and corrosion.

• Multiple gaskets are placed in reinforced cartons with inner foam or honeycomb paper protection.

• For large quantity orders, cartons are packed into sturdy wooden pallets or cases, secured with strapping bands and shrink wrap.

• All packages are clearly labeled with product code, size, quantity, and handling instructions.

• Custom packaging or branded labeling is available upon request.

11. Return, Replacement & After-Sales Policy

• Quality Guarantee: All products are manufactured and inspected in accordance with ASME B16.20 standards. A Material Test Certificate (MTC) and Inspection Report are available upon request.

• Return Conditions: Returns are accepted within 14 days of receipt if the product is found to be non-conforming to the agreed specifications or has manufacturing defects. Products must remain in original, unused condition and packaging.

• Replacement Policy: If a product is confirmed defective due to manufacturing issues, we will replace it free of charge within 30 days of delivery. Shipping costs for replacement will be borne by the seller.

• Non-Quality Returns: Returns due to ordering errors or change of mind are accepted within 7 days, but shipping and handling fees will be deducted, and a 20% restocking fee may apply.

• After-Sales Support: Our technical team provides lifetime consultation on installation, compatibility, and application challenges. Please contact our customer service via email or phone for prompt assistance.

• Dispute Resolution: Any quality disputes will be resolved through third-party inspection by an independent authority (e.g., SGS, BV) when necessary. Settlement will be based on inspection results.

​