Aluminium Ultrasonic Engine Cleaner 1500W For Cylinder Heads Engine Parts

* Energy and Cogeneration Plants
* Automotive, Aeronautics and Railway Industries
* Food Industry
* Automotive Service and Ship Maintenance
* Machining and Milling Workshops
* Injection moulding

 

The ultrasonic cleaning systems have been designed by the best engineers, and manufactured with the best materials. Any aluminium ultrasonic cleaner directly acquired from the warehouses of our pioneer company in the ultrasonic cleaning sector will guarantee excellent results.

Thanks to its innovative 28 kHz frequency cavitation system it is possible to clean more difficult parts quicker for a lower cost. The ultrasound cleaning systems have an almost perfect triple thermal insulation to reduce heat losses by more than 70%, becoming the most efficient cleaning system in the market.

Do not hesitate any longer, install a cleaning system that will help you to reduce electricity consumption and labour costs, with unbeatable results.

 

Measure the dimensions of largest parts to be cleaned and make sure to select a tank that will accommodate these parts. In addition, pay attention to the internal dimensions of the parts basket, since this is most likely where you will put the parts during cleaning.

 

2. How to choose correct Ultrasonic Frequency?Most ultrasonic cleaners operate between 28 and 40 kHz.This frequency range is well suited to the vast majority of cleaning tasks. A lower frequency such as 28 kHz produces larger cavitation bubbles. When these bubbles implode they release a larger amount of cleaning energy. For coarse cleaning such as removal of lapping abrasives or polishing paste, a lower frequency will be more effective. A higher frequency produces smaller cavitation bubbles. These cover fine featured complex surfaces more thoroughly and are more gentle than low frequencies.

 

Most cleaning operations are much more effective with heating. It's a lot like doing laundry. A hot cleaning solution is best for removing oils, machining coolants and a whole host of other contaminants from just about any surface one can think of. Although heat is a natural by-product of ultrasonic cavitation, cleaning efficiency increases when you give it a boost by using ultrasonic cleaners with thermostat- controlled heaters.