Hypoid Angle Gear Kit 80 Degree Engagement For Micro Reducer

Hypoid Angle Gear Kit 80 Degree Engagement For Micro Reducer

1. The technical principle and structural characteristics
① Non-standard shaft intersection angle design

• 80° Shaft Angle: Different from the 90° vertical transmission of traditional hypoid gears, the input and output shafts of this gear are arranged at an angle of 80°, which is suitable for scenarios where space is limited or non-orthogonal transmission is required.
• Axis offset: The meshing point of the hypoid gear is not on the axis, but the offset design optimizes the contact stress distribution of the tooth surface to improve the bearing capacity.

② Gear grinding process and material characteristics

• Hard tooth surface processing: Carburizing and quenching process is adopted, the hardness of the tooth surface is up to 56-62HRC, and after high-precision grinding, the roughness of the tooth surface Ra≤0.8μm, and the accuracy level can reach ISO 10 or above, which significantly reduces wear and noise.
• Continuous hobbing technology: Using a full CNC spiral bevel gear machining machine, continuous indexing cutting through a double-layer cutterhead, avoiding the accuracy loss of traditional intermittent tooth splitting, and supporting independent parameter adjustment of concave and convex surfaces.

③ Miniaturized design

• Compact design: Diameters as small as 38 mm are available and the weight is light, making them suitable for integration in precision equipment.
• Hollow shaft configuration: Some models use hollow output shaft for direct mounting of couplings or lead screws, simplifying mechanical design.

2. Performance advantages

① High reduction ratio and high efficiency

• Single-stage gear ratio up to 300:1: Compared with worm gear reducers (efficiency of only 60%-70%), hypoid gears have an efficiency of more than 90% and no self-locking, which is suitable for scenarios that require bidirectional transmission.
• Low-noise operation: The helical tooth meshing method reduces the impact, and with the gear grinding process, the noise can be controlled below 60dB, which is better than that of ordinary bevel gears.

② High load capacity and long life

• Increased contact strength: After carburizing and quenching, a 0.3-0.5mm hardened layer is formed on the tooth surface, and the contact stress can be increased by more than 30% in combination with the optimized tooth surface contact zone design.
• Shock resistance: Suitable for frequent start-stop or load fluctuation conditions.

③ Spatial adaptability

• Flexible installation: It supports flange installation, foot installation and other methods, and the output shaft can be customized to adapt to complex mechanical structures.
• Offset distance optimization: By adjusting the axis offset, the strength of the small wheel can be balanced with the transmission efficiency.

3. Typical application scenarios
① Industrial automation

• Collaborative robot joints: For example, the wrist joints of dual-arm robots use 80° hypoid gears to achieve high torque density transmission while reducing joint volume.
• Precision positioning stage: A wafer handling mechanism in semiconductor equipment that ensures positioning accuracy (repeatability error ≤± 1 arc minute) by utilizing high reduction ratio and low backlash characteristics.

② Medical & Food Machinery

• Surgical instrument drives: Rotating joints, such as endoscopes, require low noise, long life, and FDA-compliant materials.
• Food packaging equipment: the indexing mechanism of the high-speed filling machine needs to withstand frequent start-stop impacts, and the wear-resistant characteristics of the hypoid gear can extend the maintenance interval.

③ Aerospace & Military

• UAV flight control system: The micro reducer is used for servo control, and the 80° axis intersection angle optimizes the layout of the internal space of the fuselage.
• Missile Guidance Devices: In extreme temperatures (-50°C to 125°C) and vibration environments, carburized quenched gears are more reliable than traditional worm gears.

4. Maintenance and selection suggestions

• Lubrication requirements: The lubricating oil needs to be replaced after 300 hours of first operation, and the oil level should be checked every 3000 hours or half a year ther
• eafter to avoid mixing mineral oil with synthetic oil.
• Oil seal inspection: Ensure that the oil seal is soaked in oil during long-term storage to prevent lip hardening; If oil leakage is found during operation, the oil seal should be replaced in time.

WELCOME TO CUSTOMIZED---Non-standard customization of Dingsco Gears

1.Transformation of scientific and technological achievements: We makes full use of the scientific and technological achievements and equipment of the Gear Research Institute of Central South University to transform theoretical knowledge into practical productivity and improve the technical content of products.

2.Customized service: We provide non-standard customized services, which can realize a full range of services such as gear design, strength calculation, contact analysis, tool calculation, tooth profile error reversal, etc. to meet the personalized needs of customers.

3.Team strength:​ Our team has rich experience in the gear industry, clear division of labor and teamwork, and jointly promotes our company to become a pioneer in the industry.