11 - 20 of 211
flow control cartridge solenoid valve
Selling leads
|
... Pressure resistance: 350 bar (5075 psi) Rated flow: 60L/Min, Leakage volume: When the working pressure is 210bar, the leakage volume is within ...
2025-08-02 00:18:11
|
|
...type, series center position, hydraulic threaded cartridge valve. Working principle: When powered off, the KSV08-47BL-0-N allows oil to flow to all ...
2025-08-02 00:18:11
|
|
...control 4 way 3 position solenoid valve for hydraulic system Working principle: KSV08-47CL-0-N presets oil flow to any oil port. When coil 1 is ...
2025-08-02 00:18:11
|
|
... valve Working principle: During power outage, KSV08L-30 allows oil to flow from ② to ①, while ③ Stop at. After being powered on, the valve core of ...
2025-08-02 00:18:11
|
|
...cartridge type solenoid valve , hydraulic double connector 5 way 3 position on/off valve A 5-way 3-position solenoid valve is a type of valve that ...
2025-08-02 00:18:11
|
|
..., the valve core opens, and ② to ①, and ① to ② communicate with each other. Manual emergency: Please press the button, then rotate 180° countercloc...
2025-08-02 00:18:11
|
|
... factors such as the required flow rate, pressure rating, fluid compatibility, voltage and power requirements, and any specific certifications or ...
2025-02-11 12:21:31
|
|
...type, hydraulic threaded directional valve Working principle: When power is off, KSV10-34 allows oil to flow from ② to ① and stops at ③. After ...
2025-08-02 00:18:11
|
|
... in both directions from ② to ①. When energized, the valve core closes, thereby stopping the flow of oil from ② to ①. In this mode, after ...
2025-08-02 00:18:11
|
|
...port of the cylinder and allows the oil to flow from ③ to ①. When coil 1 is energized, the oil can flow from ③ to ② and from ④ to ①. Coil 2 When ...
2025-08-02 00:18:11
|