* Furnace inner size:φ40mmx1000mm
* Scope of use:Thermocouple annealing
* Temperature field index:one end of the temperature field is less
than 100mm from the furnace mouth,and the uniformity of the
temperature field of 400mm is less than±20°C
* Dimensions:1010×305×365(mm)
Thermocouple Validation Calibration Furnace Oven with 300-1300C Temperature Stability
|
Detailed Product Description
Products Description DTL series thermocouple verification furnace is a temperature field
constant temperature equipment suitable for verification of various
types of standard thermocouples, working precious metal
thermocouples, and base metal thermocouples. This series of
products has the advantages of good thermal insulation and
anti-leakage. The technical indicators of its temperature field
fully comply with the relevant national verification regulations
and standard technical requirements. At the same time, our company
also provides customers with non-standard customized services. Product Paramenters DTL-600G Low-cost metal thermocouple calibration furnace* Furnace inner size:40 mm ×600 mm * Temperature range: 300℃~1200℃ * Thermal field distribution:within 30mm of the effective working area,the temperature difference between any two points is not more than 0.5℃,the radius is within 14mm,and the temperature difference between any two points of the same section is not more than 0.25℃. DTL-600BG Precious metal thermocouple calibration furnace* Furnace inner size:40 mm ×600 mm * Temperature range: 300℃~1200℃ * Thermal field distribution:The highest temperature point deviates from the geometric center of the furnace:≤20mm, Temperature gradient:≤0.4℃/10 mm. DTL-300G Short thermocouple calibration furnace* Furnace inner size:40 mm x 300 mm * Temperature range: 300℃~1200℃ * Temperature field index:the center of the temperature field deviates from the geometric center≤10mm,the axial temperature gradient: ≤0.4℃/10 mm DTL-T Thermocouple annealing furnace Patent & Software copyright certificate Patent certificate of thermocouple calibration furnace Software copyright certificate of thermocouple calibration furnace Related to recommend |
Related Products
Customized Support 130mm Surface Temperature Sensor Calibration Instrument for Lab Usage |
Thermocouple Validation Calibration Furnace Oven with 300-1300C Temperature Stability |
Laboratory High Precision Thermostatic Salt Baths for Temperature Calibration 180C-670C |
Ultra-portable 60-300 C Intelligent Constant Temperature Calibration Silicone Oil Bath |
50-1200 deg C Dry Insert Block Thermostat Perfect for On-Site Temperature Calibration |
Customized Support High Precision Thermostatic Salt Baths for Temperature Calibration |
Email to this supplier