Wall-mounting Fiber Optic Splice Closure Max 144F PP PC Plastic
With High-Strength
The Fiber Optic Splice Closure (Hereafter abbreviated as
FOSC), application is: aerial, underground, wall-mounting,
duct-mounting, handhole-mounting. The ambient temperature ranges
from -40℃ to +65℃. These closures are used to protect and
connect fiber optic cables for use in harsh
environments. Suitable for bunchy & ribbon fibers Aerial,
underground, wall-mounting, hand hole-mounting pole-mounting and
duct-mounting.
Dimension and capacity
| Number of inlet/outlet ports | 2 In 2 Out (total 4 pieces) |
| Diameter of fiber cable | Φ5—Φ20 (mm) |
| Capacity | Bunchy: 12—96(Cores)
Ribbon: max. 144(Cores) |
| Weight (excluding outside box) | 2300g-2500g |
| Outside dimension (LxWxH) | 460×182×120 (mm) |
Main components
| No. | Name of components | Quantity | Usage | Remarks |
| 1 | Housing | 1 set | Protecting fiber cable splices in whole | Internal diameter:
460×182×60 (mm) |
| 2 | Fiber optic splice tray
(FOST) | max. 4 pcs (bunchy)
max.4 pcs (ribbon) | Fixing heat shrinkable protective sleeve and holding fibers | Suitable for:
Bunchy:12,24(cores) Ribbon:6 (pieces) |
| 3 | Foundation | 1 set | Fixing reinforced core of fiber- cable and FOST | |
| 4 | Seal fitting | 1 set | Sealing between FOSC cover and FOSC bottom | |
| 5 | Port plug | 4 pieces | Sealing empty ports | |
| 6 | Earthing deriving device | 1 set | Deriving metallic components of fiber cable in FOSC for earthing
connection | Configuration as per requirement |
Main accessories and special tools
| No. | Name of accessories | Quantity | Usage | Remarks |
| 1 | Heat shrinkable protective sleeve | | Protecting fiber splices | Configuration as per capacity |
| 2 | Nylon tie | | | |
| 3 | Insulation tape | 1 roll | Enlarging diameter of fiber cable for easy fixing | |
| 4 | Seal tape | 1 roll | Enlarging diameter of fiber cable which fits in with seal fitting | Configuration as per specification |
| 5 | Hanging hook | 1 set | For aerial use | |
| 6 | Earthing wire | 1 piece | Putting through between earthing devices | Configuration as per requirement |
| 7 | Abrasive cloth | 1 piece | Scratching fiber cable | |
| 8 | Labeling paper | 1 piece | Labeling fiber | |
| 9 | Special wrench | 2 pieces | Fixing bolts, tightening nut of reinforced core | |
| 10 | Buffer tube | 1 piece | Hitched to fibers and fixed with FOST, managing buffer | Configuration as per requirement |
| 11 | Desiccant | 1 bag | Put into FOSC before sealing for desiccating air. | Configuration as per requirement |
Application
Commonly used in telecommunications, CATV networks, and enterprise
networks.
Ideal for fiber-to-the-home (FTTH), fiber-to-the-building (FTTB),
and other fiber optic deployment scenarios
More details Show
