Good Roundness Stainless Steel Pipe 3 Roller Plate Rolling Machine W11S-30×3000

Good Roundness Plate Rolling Machine Stainless Steel Pipe 3 Roller Plate Rolling Machine W11S-30×3000

Plate pre-bending and rounding: The W11S plate rolling machine has a plate end pre-bending function. Through the horizontal movement of the upper roller, the upper roller is in an asymmetric position relative to the lower roller, thereby achieving high-precision plate end pre-bending. At the same time, the two lower rollers are driven by the motor and reducer to perform the rounding operation. Since the elevation of the lower roller remains the same, this makes feeding and operation easier.

Performance features

• The up roller is designed ad drum shape. Support roller install in the lower of bottom roller to help bending a perfect cylinder form thin to thick plate.
• Special bending craft, high precision pre-bending of the edge, digital control for bending process.
• Rich shape bend such ad0, U, R etc.
• Cone bending device for conical bend easily.
• Whole chassis, simple ground foundation, it's convenient to move the workplace.
• According to the role or requirement of customer, economic digital display type or TNC digital control type is optional
• CE certificate

Structure style

• This machine is a special equipment to roll the plate into curve, cylinder, conical in the pricciple of three point circle. The action as below:
• Top roller move by vertical. Power hydraulic oil tank. Role: put the pressure on the plate to make the plate bending deformation
• Top roller move by horizontal. Power electromotor. Role:adjust the horizontal distance between the top and botton roller to make the top and botton position asymmetrical to pre bend the sheet edge and decline the length of the flat zone.
• Bottom roller rotate. Power: electromotor. Role: supply the torque for bending plate.
• Opening device drop down and reset. Power: hydraulic oil tanl. Role: take out the finished workpiece