Hydraulic Briquetting Machine Waste Paper Cloth Metal Level Iron
Chip
Hydraulic Briquetting Machine Operation Procedure
Automatic hydraulic iron crumbs block machine is a equipment based
on hydraulic transmission technology. It aims to convert metal
waste such as iron dumbs into high -density and regular block
-shaped products. Its operating mechanism mainly includes the
following four steps:
Materials: First of all, metal waste such as iron dumbs is put into
a special material warehouse for block machines to ensure the
continuity and uniformity of the material supply.
Preliminary compression: Subsequently, through the driver of the
hydraulic cylinder, the head is initially compressed to the metal
waste in the warehouse. This process aims to reduce the volume of
the waste and initially increase its density.
Deep compressor: On the basis of initial compression, the hydraulic
cylinder continues to increase thrust and push the head to deeply
compress the metal waste in the mold until it forms a block with a
regular shape and uniform density.
For molding and removing: When the metal waste is compressed to the
preset pressure value, maintain a certain period of time to ensure
the density of the block. Subsequently, the mold was opened, and
the molded blocks could be easily removed.
Hydraulic Briquetting Machine Application Field
Auto -liquid voltage iron crumb block machines show their
indispensable value in multiple industries, especially in the
fields of metal processing, mechanical manufacturing, automobile
manufacturing, and ship manufacturing. Specifically, its
application scope covers the following types of metal waste:
The recycling and utilization of iron dumbs: The iron dumb waste
produced during the metal processing and mechanical manufacturing
process can form a block -shaped object that is convenient to use
after the automatic liquid voltage iron crumb block machine. These
blocks can not only be used as steelmaking as steelmaking. High
-quality raw materials have also promoted the effective use of
renewable resources.
Copper aluminum waste: In automotive manufacturing, electrical
manufacturing and other industries, copper and aluminum waste is an
important by -product. Through the compression processing of
automatic hydraulic block machines, these wastes can be compressed
into blocks that are convenient for transportation and storage,
which greatly improves the convenience and efficiency of their
reuse.
Treatment of other metal waste: In addition to iron chips and
copper and aluminum waste, automatic hydraulic pressure block
machines can also treat other types of metal waste such as
stainless steel waste, steel waste, and other types of metal waste.
After compression treatment, these waste can also be reused and
contributed to environmental protection and resource saving.
Hydraulic Briquetting MachineTechnical Parameters
| No. | Project | Unit | Specification |
| 1 | Nominal force of the main cylinder | KN | 400 |
| 2 | Maximum work pressure of liquid | MPa | 25 |
| 3 | Slip effective stroke | mm | 300 |
| 4 | Maximum opening height | mm | 600 |
| 5 | Effective area of the workbench | about | mm | 550 |
| Before and after | mm | 900 |
| 6 | Slid | The rate of decline | mm/s | 140 |
| Return speed | mm/s | 140 |
| Work | mm/s | 100 |
| 7 | preset pressure | KN | 600 |
| 8 | Rated displacement | MPa | 25 |
