XBJ series Edge milling machine is designed by our company by
furnishing with big power milling head and enlarging body base. It
is an efficient and advanced equipment for processing plate/sheet
before welding. Comparing to edge planer, it can save power &
cost, and provide enough roughness for surface. Hence, it is a
necessary equipment for many industries such like pressure
container, shipping yard, electronics, chemicals, and metal
structures. XBJ series Edge milling machine is designed by our company by
furnishing with big power milling head and enlarging body base. It
is an efficient and advanced equipment for processing plate/sheet
before welding. Comparing to edge planer, it can save power &
cost, and provide enough roughness for surface. Hence, it is a
necessary equipment for many industries such like pressure
container, shipping yard, electronics, chemicals, and metal
structures. It can achieve following chamfering edge:
It has following features comparing to other supplier:the traveling unit, can motorized elevated, manually
forward/backward, manually angle adjusted. Hence, the position of
the cutter plate can be adjusted freely to achieve straight
chamfering and any direction edge. And the milling speed is
variable adjustable through inverter motor, to fulfill any milling
speed and rapid return. Furnished with 7.5Kw milling heads, the
body and milling device are all enlarged comparing by using 5.5Kw
head. - There is one set of milling head on travel device, can mill
upper/bottom and straight edge, the angle can be freely adjusted
0-45o, to achieve different angle chamfering edge. By using
different blade, it can milling different materials such as carbon
steel, alloyed steel, stainless steel, etc. We provide a Φ125mm
cutter with machine when delivery.
- The machine body is a welded structures, Stress release is treated
after welding. So deformation is reduced and achieve stable
working.
- The guides are fixed onto the body by bolts in separate parts. The
guides are made by 45# mild steel and finely processed to shape,
surface is quenched and finely milled, which can give good
precision and wear resisting property.
- For easy to position the plate, there are plate hold device on one
side of machine body. Pull out to block the plate and return
manually inside body after the plate is hydraulic fixed on.
- The milling feed device is driven by motor & gearbox, the speed
is variable from 0.15 to 1m/min, return speed can reach 4m/min to
improve production effeciency.
- Under the press beam, we furnish all hydraulic jacks and get rid of
mechnical jack, because hydraulic jacks can provide powerful and
stable pressure and reduce vibration & noise when milling.
- The press beam and machine body are connected direcly, so the
machine has good rigidity.
- Hydraulic system is separately made (separate pump station),
furnished with accumulator to assure the sheet to be clamped on
working table always during milling. Pump station is placed beside
machine on floor.
- Power cables for traveling device are collected through multi-tube
sliding contact bars, compact, tidy and safe.
- The traveling guides are parallel. The upper guide are protected by
protect cover on whole length, to avoid damaging by dropped scraps
or dust. The bottom guide protection, is through dust shaver on the
travel device.
- On the travel device, there is manually lubrication pump, which
serve ten drops oil every minute. This volum can assure a
protection lubrication film on guide surface and keep clean on
site.
- On feeding side of the machine, there is a set of material feeding
rack. There are rollers on the rack. After lift the sheet on the
rack, by those rollers, the sheet can be moved to position easily.
- Customer can load two or more small sheets on the machine. The two
or more plates can be loaded and clamped separately.
| Model | XBJ-6 | XBJ-9 | XBJ-12 | XBJ-18 | | Beveling stroke | 6m | 9m | 12m | 18m | | Bevelling range | 0-45° | 0-45° | 0-45° | 0-45° | | Beveling sheet thickness | 6-50mm | 6-50mm | 6-50mm | 6-50mm | | Max bevel depth at first cut | 12-15mm | 12-15mm | 12-15mm | 12-15mm | | Transverse bevel speed | 0.3/0.5m/min | 0.3/0.5m/min | 0.3/0.5m/min | 0.3/0.5m/min | | Return speed | 5m/min | 5m/min | 5m/min | 5m/min | | Bevel spindle rev. | 125-900rpm | 125-900rpm | 125-900rpm | 125-900rpm | | Nos of milling head | 1(+1) | 1(+1) | 1(+1) | 1(+1) | | Milling head power | 7.5kw | 7.5kw | 7.5kw | 7.5kw | | Platform height | 900mm | 900 mm | 900mm | 900mm |
|
