INDRON® Maintenance-Free Ceramic Bushings are advanced ceramic
bearing solutions specifically designed for demanding environments
such as mining, where extreme wear, corrosion, and temperature
conditions challenge traditional metal bushings. These bushings are
fully customizable and integrate cutting-edge materials and
structural innovations to deliver long-lasting, lubrication-free
performance in abrasive, high-load conditions.
| Bearing type | INDRON bearing | AR bearing | Ceramic bearing | Rubber bearing | Babbitt alloy bearing |
| Characteristics | The performance is close thordon, which can use more equipment
assembly methods. In addition to traditional installations by
freezing and pressurizing. It can also be installed by coating
reactive thermal polymerization Dx and cold sticking. | Good wear resistance and impact resistance. The bearing hardness is
high; the shaft sleeve is easy to wear; the temperature difference
changes greatly; there will be the risk of shelling; the price is
high. | Wear-resistant, heat-resistant, corrosion-resistant, lubricated by
pump circulating water, capable of dry grinding for a short time,
high requirement on accuracy in processing and assembly, fragile
and the most expensive. | It has a long history and mature manufacturing process, featured by
wear resistance, anti-seismic, impact resistance, convenient
assembly/disassembly and low price (only 20% of ceramic bearings
price) | Wear resistance and impact resistance require a set of more
complicated sealing and lubricating devices and mechanisms. |
| Lubricating requirements | Clean water can be used for lubrication or 150s dry start according
to the material grades. | Dry start more than 180S without clean water lubrication. | It can be lubricated by pumping medium without special clean water
lubrication. | Clean industrial water | Grease lubrication requires a grease supply lubrication system. |
| Working temperature | ≤70ºC | ≥273ºC | The bearing itself can withstand the temperature of 1,400ºC | ≤50ºC | ≤65ºC
Short time up to 80ºC |
| Application site | For pumping stations short of clean water or pumping stations
requiring short-term dry friction, hRBR grade is suitable for water
quality with moderate sediment content. | Pumping stations without clean water or pumping stations requiring
dry friction of more than 180S. | Pumping stations without clean water or pumping stations requiring
short-term dry friction. | Extensive application in any pumping stations with clean water
sources. | The liquid of the pump itself cannot be used for bearing
lubrication in the pumping station. |
| Bearing type | INDRON bearing | AR bearing | Ceramic bearing | Rubber bearing | Babbitt alloy bearing |
Our Maintenance-Free Bearing Features
Maintenance-Free Operation
Self-lubricating design with no need for oil or grease.
Capable of dry starts, eliminating cold welding even under high
load and high speed.
No external lubrication or cooling system required.
Exceptional Wear and Corrosion Resistance
Made from high-hardness silicon carbide (SiC) ceramics and
super-hard alloys.
Resistant to strong acids, alkalis, and abrasive media—ideal for
mineral slurry and chemically aggressive environments.
High Mechanical Strength and Structural Reliability
Superior hardness (Knoop 2700–2800), compressive strength up to
7900 MPa.
Designed with a cushioning elastomer layer that absorbs vibration,
compensates for misalignment, and protects the ceramic sleeve from
impact-related damage.
Thermal Shock and High-Temperature Stability
Withstands temperatures up to 1500°C without loss of hardness or
mechanical integrity.
Excellent thermal conductivity reduces heat buildup, extending
service life.
Customized for Mining Equipment
Tailored to fit various mining applications, including pumps,
conveyors, crushers, and agitators.
Dimensions and configurations can be customized to suit unique
system requirements.
Technical Structure
Our ceramic bearing structure consists of:
Ceramic Bushing (Silicon Carbide): Ultra-hard, wear-resistant, and corrosion-proof.
Dual-Layer Shaft Sleeve (Stainless Steel + Hard Alloy): Provides high sliding performance and wear resistance under water
lubrication.
Cushioning Layer (German NDI Elastomer): Damps vibrations and protects ceramic components during
operation and installation.
Reinforced Housing (Cast Iron/Stainless Steel): Robust support structure with integrated coolant flow
channels for temperature control and shock absorption.
Who Is Techemer Factory?
Our company will take integrity, quality first, customer first and
first-class service as its tenet.
| 01. Focus On Water Lubricated Bearings And Shaft Seals Since 2008 | 02. Offer Customized Bushes, Bearings And Seals Production |
| 03. Stabe Quality With Reasonable Price | 04. Fast Delivery With Online Service After Sale
|
Our Strengths
Our senior material scientists and mechanical engineering
specialists have reached the international advanced level in
material design, material innovations, material manufacturing and
material applications. As a company focusing on the needs of
customers and possessing years of experience and professional
skills, we are assisting customers in solving their technical
problems and providing extraordinary material technology solutions.
Welcome to Contact Us!
