Thinkbond 45 TPU / CPU Adhesive High-Strength Hot Vulcanization Bonding Agent
|
Thinkbond 45 TPU/CPU Adhesive High-Strength Hot Vulcanization Bonding Agent Product introduction: Thinkbond 45 series adhesive is a highly reactive thermosetting
bonding agent engineered for superior adhesion between TPU/CPU and
diverse substrates. Optimized for demanding industrial applications
requiring extreme durability and dynamic load resistance. Properties: State : liquid Shelf life: 12 months Cure System: Heat-activated vulcanization
Product Variants:
Application:
Applying Thinkbond: Agitation: We recommend stir Thinkbond 942 before the application to avoid
settle down. Brushing: Application by brushing is normally undertaken without further
dilution, but for coating large areas, dilution with MEK (or the
diluent blend shown below) improves flow and speed of application. Spraying: We recommend an HVLP gun using 1.5 Bar air-pressure and a nozzle
size of 1 -1.5mm. For this application we recommend diluting
between 50 and 100% v/v. Roller coating: Dilute to 35 - 45 seconds on a DIN 4 or Ford 4 cup at 25 C for
most roller application processes. Dilution with a high boiling
solvent like MPA may be necessary to achieve the best finish and to
reduce the skinning of the bonding agent in the applicator. Drying: Dry the film between 10 and 30 minutes at room temperature. If it
is necessary to reduce drying time, we recommend to use forced air
for 5 minutes at 100ºC maximum. Do not use in this stage
temperatures above 100ºC to avoid adhesive pre-cure. After this
process, follow to cure. Thickness of application layer: The film obtained by applying Thinkbond 942 is colorless. The layer thickness must be between 15 and 25 µm. For severe environments or dynamic fatigue applications, use ≧25
microns. Under these conditions it is possible to achieve bonds
with no edge-failure after 400 hour salt-spray tests Parts with Thinkbond 942 already applied can be stored for 30 days
prior to cure. Storage: Keep container tightly closed during storage and always keep away
from heat sources. Store in an environment below 10ºC increases the
shelf life of the adhesive. More Thinkbond adhesive:
Shanghai LoreChem Co., Ltd. was established in 2008. It is a
high-tech enterprise which is dedicated to serve releasing products
which involve semi-permanent release agent, anti-sticking, surface
lubrication and thermal reactive adhesive. Shanghai LoreChem has
been improving product quality for 15 years. The releasing products
are mainly applied in rubber, polyurethane and composite industry.
The brand of Lubekote for release agent and Thinkbond for adhesive
have been registered in China. Both of them are well known in the
industry. |
|||||||||||||||||||||||||||||
Product Tags: TPU CPU Adhesive High Strength Bonding Agent |
![]() |
Thinkbond 45 TPU / CPU Adhesive High-Strength Hot Vulcanization Bonding Agent |
![]() |
Liquid Type Solvent Based CPU Adhesive Universal Bonding Agent One Component |
![]() |
CPU / TPU Universal Adhesive Bonding Agent Solvent Based Clear One Component |
![]() |
Cold And Hot Water Resistance CPU Adhesive Bonding Agent 25L 200L Packaging |
![]() |
Thinkbond Bonding Agent For Scraper CPU Solvent Based Strong Adhesion Ability |
![]() |
Universal Type Polyurethane CPU Roller Adhesive Bonding Agent Strong Adhesion |