Resin Solvent Based Concrete Release Agent Slight Odor
|
Detailed Product Description
|
Mold Release Agent for Resin Concrete Solvent Based Multiple Releases
Application Field:
It is a lubricant and release system designed for resin
concrete industry. It has shown excellent performance in releasing resin concrete
parts. It can be diluted with solvent.
Application: The mold should be thoroughly cleaned. Mold cleaning and release agent application should be performed in
a well ventilated area. 1. Apply Lubekote release agent to clean, dry cotton cloth. 2. Gently wipe over mold surface covering an area of approximately
0,5 m². Vigorous rubbing or polishing is not required. 3. Repeat steps 1 and 2 on the adjacent area. Ensure a good overlap
with the previous area to provide complete coverage 4. Repeat until mold is completely coated. 5. When dry, allow a further 15 minutes between coats for the film
to cure. 6. Repeat Steps 1- 5 above for a further 3 coats (4 in total). 7. When dry, allow final film to cure for at least 30 minutes at
room temperature before molding. Allowing a longer cure or heat
curing (e.g. 15 min. at 60 °C) will improve film durability Reapply one coat of Lubekote release agent in the same way as
described above when release becomes hesitant. Handling precautions:
|
|||||||||
| Product Tags: Solvent Based Concrete Release Agent Resin Concrete Release Agent Slight Odor mold release agent |
Related Products
|
Water-Based Forging Release Agent for Aluminum Die Lubrication |
|
Water Based Release Agent for Battery Case STM Molding Process |
|
Release Agent for Unsaturated Resin Bathroom Washbasin |
|
Carbon Fiber Molding Release Agent Perfect Glossy Surface |
|
Semi Permanent Composite Release Agent Carbon Fiber Mold Release Agent For Rack |
|
High Temperature Composite Release Agent , Pltrusion Internal Mold Release Agent |
Email to this supplier