China Slipform Paver manufacturer
Jiangsu Siming Engineering Machinery Co., Ltd.
Jiangsu Siming Engineering Machinery Co., Ltd.
1
Home > Products > Averaging Leveling Beam >

SMC-8018 Averaging Leveling Beam 3HZ Construction Machine Control Systems

Browse Categories

Jiangsu Siming Engineering Machinery Co., Ltd.

Province/State:jiangsu

Country/Region:china

Tel:86-514-88292120

Contact Person:
Mrs.Feiya
View Contact Details

SMC-8018 Averaging Leveling Beam 3HZ Construction Machine Control Systems

Brand Name SIMING
Model Number SMC-8018
Certification ISO 9001
Place of Origin Jiangsu, China
Minimum Order Quantity 1 psc
Supply Ability 10 psc per month
Delivery Time 1-3 days
Packaging Details wooden packing
Resolution: 0.2mm
Output frequency: 3HZ
Controller output type: NPN, PNP
Controller output current: 5A
Working voltage: 10V~30V
Communication type: CANbus
Detailed Product Description

SMC-8018 The Ultimate Averaging Leveling Beam for Construction Efficiency

 

Description

The SMC-8018 produced by Jiangsu Siming is a general-purpose construction machine control system. The front section of the unilateral balance beam uses 3 single-probe sensors, and the rear section uses a 6-probe shoe sensor. The shoe sensor can be used for height detection, and its operation is simple and reliable. SMC-8018 is a flexible and efficient control system. Its operating system is based on advanced micro-processing technology and adopts CAN bus technology. It is suitable for all kinds of imported and domestic

 

Usage conditions:

The SMC-8018 produced by Jiangsu Siming is a general-purpose construction machine control system. The front section of the unilateral balance beam uses 3 single-probe sensors, and the rear section uses a 6-probe shoe sensor. The shoe sensor can be used for height detection, and its operation is simple and reliable. SMC-8018 is a flexible and efficient control system. Its operating system is based on advanced micro-processing technology and adopts CAN bus technology. It is suitable for all kinds of imported and domestic brand pavers, and is used for automatic leveling control in the construction of supporting pavers.

 

Technical features and advantages:
1.Highly intelligent, it can automatically identify the limbs of construction workers, tools, pits and wells, etc., and give automatic alarms; when there is a line connection failure or probe failure, the panel LED numbers can prompt alarm displays. For example, some systems are equipped with multiple probes on both sides. If one group of probes fails, it can switch to emergency mode and still work normally to ensure the smooth progress of construction.
2.The processing technology is fine. The product adopts integral potting, which is moisture-proof and vibration-resistant, and the protection level can reach IP67. The selected components are directly imported from abroad to reduce possible defects in the intermediate links.
3.The detection range is large, which can improve the continuity of measurement and avoid the occurrence of sudden rises and drops.
4.It has good adaptability and can work stably and reliably in different construction environments (such as high-temperature environments), temperature conditions and material characteristics.
5.The system is flexibly configured. The controller is matched with a variety of sensors to meet various construction requirements such as surface layer paving, following seams, and road surface sensing. Some can be seamlessly connected with the original controller of specific vehicle models, simplifying the system connection and operation steps.
6.It can solve the problem that traditional balance beams cannot pave curves and bridge roads. Some balance beams use independent probes for temperature compensation to further improve the measurement accuracy.

 

Multi point introduction:

Technical Parameters:

Working voltage: 10V~30V

Communication type: CANbus

Controller output current: 5A

Controller output type: NPN, PNP

Output frequency: 3HZ

Ultrasonic detection range: 25cm~100cm

Resolution: 0.2mm

Ultrasonic probe frequency: 200KHZ

Working temperature: -20~85℃

Product configuration:

serial numbernameunitquantityRemark
18008 master controllerOnly2 
28008 sensorOnly6 
38428 sensorOnly2 
48008 junction boxOnly2 
58008 sensor temperature compensation rodindivual6 
68008 power cordroot22m spiral wire black
78008 junction box wireroot22m helix yellow
88008 sensor lineroot8Black spiral wire 2 meters 4, 1.3 meters 2
9handleOnly8 
10Main controller mounting plateindivual2M10×150 screws, 2 pieces (including flat spring washer nuts)
M4×6 inner hexagon, 8 pieces
M4×15 inner hexagon, 4 pieces
11Junction Box Activity Cardindivual2M10×150 screws, 2 pieces (including flat spring washer nuts)
M4×6 inner hexagon, 8 pieces
12hanging rod activity cardOnly8M10×150 screws, 8 pieces (including flat spring washer nuts)
13Locating ringOnly12Contains 16 pieces of M10×25 screws
14U-shaped sensor mounting cardset6M8 stainless steel wing nuts, 16 pcs, M8 anti-loosening nuts, 16 pcs
15Card beam deviceOnly4M10×90 screws and nuts, 4 pieces (including flat elastic pads)
16hanging rodroot8 
17Aluminum alloy beam/stainless steel beamBag4M10×35 screws, 16 pieces (including spring washers);
M10×50 screws, 8 pieces (including flat spring washers)
18Stainless Steel Inner BracketBag2M10×40 screws, 8 pieces (including nuts)
19Stainless steel outer bracketBag2M10×40 screws, 16 pieces (including nuts)
20Bracket connection round piperoot4 
21stuckOnly8M12×75 screws, 16 pieces (including flat elastic pads)
22Standard PartsBag1 
23cable tieroot20 
24active splint  Configure according to customer needs
25welding plate  Configure according to customer needs
26toolset1Including utility knife, 1 17-19 solid wrench, 1 16-18 solid wrench, 1 16-18 torx wrench, 1 17-19 torx wrench, 1 12-inch adjustable wrench
27materialshare1Including 1 instruction manual, 2 labels, 1 identification certificate, 1 shipping list, and 1 user opinion survey form

 

Construction case:

 

 

Product Tags: SMC-8018 Averaging Leveling Beam   3HZ Construction Machine Control Systems   Averaging Leveling Beam 3HZ  
Related Products
Email to this supplier
 
From:
Enter your Email please.
To: Jiangsu Siming Engineering Machinery Co., Ltd.
Subject:
Message:
Characters Remaining: (80/3000)