SMC-8018 Ultrasonic Balance Beam Paver Machine Averaging Leveling Beam

Usage conditions:

The SMC-8018 produced by Jiangsu Siming is a general-purpose construction machine control system. The front section of the unilateral balance beam uses 3 single-probe sensors, and the rear section uses a 6-probe shoe sensor. The shoe sensor can be used for height detection, and its operation is simple and reliable. SMC-8018 is a flexible and efficient control system. Its operating system is based on advanced micro-processing technology and adopts CAN bus technology. It is suitable for all kinds of imported and domestic brand pavers, and is used for automatic leveling control in the construction of supporting pavers.

Functions and Features:

1. Upgraded products based on 8008;

2. The controller is connected with 3 single-probe sensors and a boot-type sensor. It has the characteristics of 8008 simple design, convenient and flexible operation, and affordable price. The shoe-type sensor improves the measurement accuracy and anti-interference ability.

Chinese controller:

It adopts digital control mode and forms a control network with sensors through the CAN bus protocol, which has strong scalability.

The system has a self-diagnosis function, and the system faults are clear at a glance on the display screen.

Select different control modes according to the working conditions, so that the system can adapt to the working conditions to achieve the optimal control effect, and the equivalent beam length can be adjusted.

Real-time data on the LCD screen, all operation interfaces are in Chinese or graphic prompts, making it easier to master and more convenient to use.

Ultrasonic sensor features:

High-quality high-power probes are used.

Use CAN bus bus system to exchange data with the controller.

Unique shape and structure for easy maintenance and repair

The compensation rod of the sensor and the internally set temperature compensation can work independently or simultaneously.

All sensors are interchangeable.

The shoe sensor is composed of 6 ultrasonic probes. The 5 independent probes of the sensor work at the same time. Only 3 data close to the actual detection value will be used to obtain the average value.

The shoe sensor can replace the inclinometer walking curb, steel wire or cotton thread, no mechanical wear, no sticky material.

Technical Parameters:

Working voltage: 10V~30V

Communication type: CANbus

Controller output current: 5A

Controller output type: NPN, PNP

Output frequency: 3HZ

Ultrasonic detection range: 25cm~100cm

Resolution: 0.2mm

Ultrasonic probe frequency: 200KHZ

Working temperature: -20~85℃