Automatic Slipform Paver 16m Paving Concrete Slip Form Paver

Slipform Paver with Modular Assembly Mode for Different Bridge Deck Widths

Features

(1) The modular assembly mode of the whole machine truss adopts a split composite connection for the roller shaft, which is easy to install and can expand the combination to different widths, making it suitable for the use of bridge decks with different widths and improving equipment utilization.

(2) This equipment uses a tire walking mechanism to directly walk on the steel mesh of the bridge deck. If there are local unevenness, the hydraulic cylinder is controlled by a high-precision digital leveling instrument to adjust the elevation. In the case where the guardrail has already been laid, suspended structures can be used on both sides to support walking on the guardrail;

(3) Two vibrating rollers with leveling and slurry lifting functions, and the height and inclination angle of the rollers can be adjusted up and down. At the same time, the shock-absorbing pad handwheel can be adjusted arbitrarily to achieve the adjustment of the transverse slope of the bridge deck.

(4) Equipped with a flushing system for easy daily maintenance.

(5)Provide lighting fixtures to address lighting issues during nighttime and tunnel construction.

(6) The whole machine adopts high-frequency vibration pushing plate to push the material, which can keep the concrete in a light and flowing state, and the material level is uniform and consistent..

(7) Efficient compaction design effectively ensures the compactness of concrete, and can also achieve certain ideal compaction and leveling effects for low slump concrete.

(8) Using large-diameter high-speed rollers, it has a long wear resistance life, flat transverse end faces, and good linear and slurry lifting effects.

(9) High horsepower output easily maintains a high-speed and stable paving state, which is conducive to ensuring construction quality and improving construction efficiency.

Technical Parameters

Cases: