Safeagle Artificial Intelligence AI Detection System Airport X Ray
Baggage Luggage Scanner Machine An electronic device that uses a conveyor belt to send the
inspected baggage into the X-ray inspection channel to complete the
inspection. When baggage enters the X-ray inspection channel, it
will block the package detection sensor, and the detection signal
is sent to the system control part to generate an X-ray trigger
signal, which triggers the X-ray source to emit an X-ray beam. A
fan-shaped X-ray beam passing through the collimator passes through
the inspected items on the conveyor belt. The X-rays are absorbed
by the inspected items and finally bombard the dual-energy
semiconductor detector installed in the channel. The detector
converts X-rays into signals. These very weak signals are amplified
and sent to the signal processing box for further processing. X-ray equipment has the capability to display material types in
different colors. 7 colors and Z-scan are designed to help operators detect a range
of dangerous liquid and explosives & narcotics respectively in
real time by marking a potential threat on the X-ray image.
Safeagle® Systems detection algorithms are based on regulatory
material analysis techniques. * Orgaince: some chemical liquid, explosives, drugs,etc. are displayed in orange, but Safeagle® x-ray system can display observable this kinds of threats in
red/organic/yello X Ray Baggage Luggage Scanner Parameter: | NO. | Item | Tested Value | | | 1 | Wire resolution | 40 | AWG | | 2 | Penetration resolution | 32 | AWG | | 3 | Spatial resolution | Vertical: 1.0 Horizontal: 1.0 | mm | | 4 | Penetration | 8 | mm | | 5 | Organic matter resolution | / | mm | | 6 | Grayscale, mixture resolution | / | mm | | 7 | Inorganic resolution | / | mm | | 8 | Effective material resolution | / | | 9 | single dose | ≤3.5 | uSv(uGy) | | 10 | leakage dose | ＜1 | uSv/h(uGy/h) | | 11 | noise level | No more than 60dB | | 12 | conveyor belt speed | Around 0.2 m/s | | 13 | Conveyor belt maximum load | 100kg | | 14 | Maximum power consumption | 0.5kW | | 15 | safety performance requirements | Compliant with GB15208.1-2018 standards | | 16 | Electromagnetic Compatibility Requirements | | 17 | Electrical Safety | | 18 | Environmental adaptability | | 19 | leakage current | No more than 5.0mA | | 20 | film security | Compliant with ASA/ISO 1600 film safty standards | | 21 | weight | 260kg | | 22 | Working environment temperature/relative humidity | 5℃～40℃；0%～90% | | 23 | Storage temperature/humidity | -20℃～+60℃/10%～90% | | 24 | Atmospheric pressure | 86kPa～106kPa | | 25 | Working power | AC220V+10%~-15%,50Hz±3Hz | | 26 | operating system | LINUX | | 27 | running memory | 1G | | 28 | storage memory | 8G |
X Ray Baggage Luggage Scanner Software Information: | NO | Item | Functions | | 1 | POST | With fault self-checking function, the corresponding fault
information can be displayed when a fault occurs (1. Emergency stop
2. Side panel open 3. Calibration failure 4. Acquisition system
failure 5. Hard disk not found) | | 2 | Image Processing | With color/black and white, local increase, high penetration, low
penetration, super increase, organic highlighting, inorganic
highlighting, inverse color, brightening, darkening, gray sweeping,
zooming, organic marking, suspicious object marking, edge
enhancement processing functions | | 3 | image pullback | 30 checked images can be played back | | 4 | Number of image storage | Can store 10,000 checked images | | 5 | real-time curve | The real-time curve can be used to detect whether the acquisition
system and components are working properly | | 6 | time setting | System time can be set | | 7 | Probe setting | Can realize manual deletion of high and low energy detection board
dead pixels, and display the deleted dead pixels in the display
area | | 8 | Ray source settings | There are two ray source control modes, digital source and analog
source, and can control the digital source.Set the ray source
parameters | | 9 | Alarm system | The alarm function can be turned on and off, the alarm type of the
alarm frame and sound and light alarm can be selected, and the
sensitivity, minimum absorption rate, maximum absorption rate, and
alarm duration can be sets | | 10 | Troubleshooting | It can diagnose whether the import and export light barrier, side
panel switch, emergency stop switch, light source and other
components are normal, and display the standard value and current
value of the detected voltage | | 11 | Image settings | You can set the control direction of the drum operation and the
movement direction of the image display | | 12 | software registration | It can realize software registration function, and has serial
number, registration code, registration status, system time
information display | | 13 | User login | By entering different user names and passwords to log in to the
menu, only login can be used for other parameter settings | | 14 | User Management | Can add, delete, edit operation user name and password and set user
level, restore deleted historical users | | 15 | authority management | Different default permissions can be set according to user level | | 16 | language settings | System language can be set to switch between Chinese and English | | 17 | log management | User operations can be monitored and user operations can be queried | | 18 | about | Display version and device number | | 19 | TIP report | report can be generated for the operation of identifying TIP after
the TIP insertion function is enabled. The report content: user
name, number of TIP insertions, number of marks, false positive
rate, detection probability, false positive probability | | 20 | TIP management | It can be set to enable and disable the insertion of dangerous
goods, and can set the identification time, prompt time, insertion
frequency, proportion of single items, add TIP files and delete
files. | | 21 | file management | Query, open and export inspected images | | 22 | Function settings | You can adjust the log level of the work, save the file time,
whether to open the training function, whether to turn on Smart
Roller to set | | 23 | Statistics | Display the working time of the system, the total working time of
the ray source, the total number of luggage packages in the system,
the total number of luggage packages this time, and the above data
can be cleared | | 24 | System parameter settings | Export data, pictures, backup directory can be selected, motor
type, Select and adjust the detector type, whether to open the debugging
mode, model, and gain. You can enter the corresponding IP address on the network
connection to achieve the sharing function, there are in the system
settings The corresponding software can realize the system upgrade |
|
