5HP Industrial Water Chiller Water Screw Scroll Centrifugal Compressor PLC Microcomputer Controller
|
Detailed Product Description
Product Description:Air-cooled chiller and water-cooled chiller two kinds of chiller in the temperature control is divided into low-temperature chiller and room temperature chiller, room temperature temperature is generally controlled in the range of 0 degrees -35 degrees. Low-temperature machine temperature control is generally in the range of 0 degrees - minus 45 degrees or so.
Features:1. All pipeline insulation design to prevent local convection in
the body pipeline. Cooling temperature range 5℃-35℃, independent
temperature controller anti-freezing protection. 2. Stainless steel insulated water tank. 3. Hydrophilic light fin condenser, better heat transfer, faster
heat dissipation. 4. Compressor and pump have overload protection. 5. Adopt large capacity shell and tube evaporator, good cooling
effect, can be applied to higher temperature environment. 6. The refrigerant adopts R22 with good refrigeration effect. 7. Optional R407C environmental protection refrigerant, closer to
nature. Technical Parameters:
Applications:⒈ chiller can be used in supporting vacuum equipment. Such chillers
also meet the needs of high-quality vacuum equipment, such as
molecular pumps, small vacuum coating machines. 2 chiller used in supporting medical laser equipment. This kind of
chiller unique water quality treatment characteristics, make it
become a medical laser equipment supporting the ideal choice
supporting laboratory equipment. This series of chiller is also
widely used in atomic absorption spectrometry analyser,
fermentation device, reaction kettle, electrophoresis instrument,
etc. Chiller in the use of the process must pay attention to: first of
all, before using the tank should be added to the liquid medium,
followed by the use of the working power supply should be
determined according to the model number, the power supply power
should be greater than or equal to the total power of the
instrument, the power supply must have a good grounding, and again,
the chiller should be placed in a dry and ventilated place, the
back was and came to the side of that side away from the obstacle
400mm away, and finally in the use of the finished water chiller,
all the switches Set off the state, connect the power plug, with a
suction ball, skin tube to suck the liquid in the tank dry. 3 cold water machine can be used to supporting experimental
condensing equipment. Such as rotary evaporator, distiller,
condenser tube, with temperature high and low controllable, stable
temperature, high condensation efficiency, can effectively improve
the recovery rate. At the same time its fluid purification
function, can avoid the circulation pipe clogging, growth of
microorganisms. Support and Services:Industrial Water Chiller Technical Support and Service
|
||||||||||||||||||||||
| Product Tags: 5HP Industrial Water Chiller Screw Industrial Water Chiller |
Related Products
|
High Pressure Industrial Water Chiller With R22/R407C/R134A Refrigerant |
|
Screw Water Cooled Industrial Chiller 220V 380V 440V 480V 600V -20℃~+20℃ |
|
5HP Industrial Water Chiller Water Screw Scroll Centrifugal Compressor PLC Microcomputer Controller |
|
Industrial 5kw Air Cooled Water Chiller With Screw Scroll Centrifugal Compressor |
|
Small Industrial Water Chiller R22 R407C R134A PLC Microcomputer Screw Scroll Centrifugal |
|
Glycol industrial water cooled chiller Machine 50HZ 60HZ -20℃ To +20℃ |
Email to this supplier