Product Description:
The One-touch fully pneumatic cleaner TW-CL1700 is designed for
cleaning two stencils simultaneously. It is a highly efficient
cleaning machine manufactured by TongWei, located in Shenzhen,
China. The cleaner is equipped with two separate cleaning systems,
allowing it to clean different types of workpieces at the same
time. It can handle various cleaning tasks, such as cleaning red
glue and solder paste stencils simultaneously or cleaning leaded
and lead-free solder paste together.
Features:
- Full stainless steel body: The cleaner has a durable and
corrosion-resistant stainless steel body that meets environmental
requirements and standards.
- Pneumatic operation: It operates entirely on pneumatic power,
eliminating the need for electricity and reducing safety hazards.
It has obtained certification for EU safety regulations.
- High-density isobaric dual-side rotary cleaning nozzle: The cleaner
is equipped with a high-density isobaric dual-side rotary cleaning
nozzle, which provides strong cleaning power without damaging the
stencil tension.
- Four-stage filtration system: It features a four-stage filtration
system and a low vent pipe design for solvent recycling and low
liquid consumption.
- Integration of high-quality components: The machine incorporates
high-quality components from global suppliers, ensuring excellent
quality, stable performance, and a long service life.
- Dual independent cleaning systems: The TW-CL1700 has two sets of
independent cleaning systems, allowing it to clean two completely
different kinds of stencils simultaneously, including stencils of
different sizes and types.
Technical Parameters:
Spray Cleaning MachineParameters | Specifications |
---|
Cleaning time | 0-999 seconds (adjustable) |
Air supply | 0.45Mpa ~ 0.7Mpa |
Cleaning method | 360° Rotary Cleaning Solution Spraying And High-pressure Air
Blowing (cleaning → Drying) |
Reservoir capacity | 80L*2 |
Drying method | Compressed Air Drying |
Applicable stencil size | Maximum750mm(L) × 750mm(W) × 40mm(H) Special Size On Request. |
Weight | 600KG |
Working ability | Maximum two pieces at a time: 750(L)X 750(W)X40(H) mm |
Cleaning fluid capacity | 85L |
Filtration | Circulation filtration of cleaning solution (0.45μm) |
Drying method | Compressed air blow-drying |
Object of cleaning | Residues of solder paste, red glue, ink, etc. |
Operating mode | one-touch start |
Static (in a signal) | <70db |
Exhaust port size | 1 exhaust port φ100mm x 30mm high |
Workflow
Plate release→chemical cleaning→compressed air blow-drying→plate
removal
Working Principle:
Connected to the gas source, add the appropriate
cleaning fluid in the liquid tank tank, long press the start button
for 5 seconds the machine into automatic operation, pneumatic
diaphragm pump began to work, the liquid through the diaphragm pump
into the filter filtered rotating spray to the stencil, cleaning
spray to the set time, the cleaning process is complete; and then
into the blow-drying process, compressed air blowing off the
stencil residue of the drug and recycled to the cleaning box until
the set time So far, the whole workflow is completed.
Applications:
The TW-CL1700 One-touch fully pneumatic cleaner is suitable for
cleaning various types of stencils, including solder paste
stencils, red glue stencils, and more. It provides efficient and
reliable cleaning for residues of solder paste, red glue, ink, and
other substances commonly found on stencils used in PCB assembly
and printing processes.