220-Z50 Multi-Application Automatic Dispensing Platform
Product Overview
The 220-Z50 Stepper/Servo Multi-Application Automatic Dispensing
Platform is a high-precision 3-axis motion system designed for
industrial fluid dispensing applications. It supports customizable
dispensing valves tailored to different adhesives, offering
dedicated automatic dispensing solutions. Widely used across
electronics, automotive, hardware, toys, and new energy industries,
it delivers efficient, stable, and flexible automation for
dispensing, coating, and filling processes.
Key Advantages & Features
1.High-Precision Motion Control
The XYZ axes utilize high-precision stepper motors with synchronous
belt transmission and linear guides, ensuring smooth movement and
accurate positioning. This guarantees consistent dispensing paths,
reduces material deviation, stringing, and leakage issues, and
significantly improves product yield.
2.Flexible Multi-Scenario Adaptation
Compatible with a variety of adhesives such as UV glue, AB glue,
silicone, epoxy, etc., and supporting different dispensing valves
like piezo valves, screw valves, piston valves, or jet valves.
Quickly customize solutions for adhesives with varying viscosities
and curing properties to meet diverse industrial applications.
3.Extensive Expandability
The platform provides expansion interfaces for accessories such as
temperature control modules, pressure regulation units, vision
positioning modules, and dual-station platforms. Easily handle
complex parts, multi-spec production lines, and reduce repeated
equipment investment.
4.Easy Operation & Stable Performance
Equipped with a handheld control system for simple, intuitive
operation. Supports fast programming, path editing, and parameter
adjustment. Powered by MEAN WELL from Taiwan, ensuring reliable,
long-term operation with low failure rates. Emergency stop switch
included for safe production.
5.Cost-Effective Automation Solution
Built on a standardized 3-axis platform, modular customization
delivers dedicated dispensing capabilities at lower cost and higher
adaptability than traditional dedicated dispensing machines. Ideal
for SMEs upgrading their automation processes.
Standard Configuration & Application Compatibility
Compatible Adhesives: UV glue, anaerobic glue, instant adhesive,
epoxy, thermal grease, red glue, solder paste, AB glue, sealant,
lubricants, and various other fluid materials.
Typical Applications:
- Dispensing for electronic components
- PCB conformal coating
- LED encapsulation
- Automotive parts sealing
- Lubrication of hardware components
- Toy assembly bonding
- New energy battery encapsulation
Industry Use Cases
Consumer Electronics – PCB Conformal Coating
Challenge: Manual coating leads to uneven layers, low efficiency, bubbles,
and incomplete coverage, causing board moisture issues and high
repair rates.
Solution: 220-Z50 equipped with pneumatic spray valves + pressure tank for
automated conformal coating, supporting full-board or selective PCB
coating.
Result: Coating efficiency increased 3x, uniform layer thickness, yield
rate improved from 85% to 99%, and easy adaptation to multiple PCB
sizes
LED Lighting – Lamp Bead & Board Encapsulation
Challenge: Precise UV or fluorescent adhesive dispensing required; manual
application causes over/under-gluing, affecting brightness and
lifespan. Equipment versatility limited for small-batch,
multi-model production.
Solution: Piezo jet valves + UV curing module enable non-contact high-speed
dispensing for SMD beads and COB boards.
Result: Dispensing speed exceeds 100+ dots/sec, minimum dot 0.01μL,
non-contact prevents bead damage, supports multiple lamp board
specifications for flexible production.
Automotive Components – Sensor & Sealant Dispensing
Challenge: High consistency and stability required; manual application causes
gaps and uneven width, compromising waterproof/dustproof
performance.
Solution: Screw valve + heating module, compatible with high-viscosity
silicone or PU sealant for continuous coating of sensor housings,
lights, and seals.
Result: Dispensing error ≤ ±0.05mm, consistent bead width and volume,
compliant with IATF16949 standards, supports 24/7 production.
New Energy – Lithium Battery & Cell Encapsulation
Challenge: Manual coating of thermal grease and epoxy on battery cells is
inefficient and uneven, affecting heat dissipation and safety.
Solution: Piston valve + pressure control system for medium/high-viscosity
adhesives, supporting bottom coating, tab protection, and battery
module filling.
Result: Efficiency increased 4x, uniform thermal layer, compatible with
multiple cell types (prismatic, pouch), supporting batch production
while reducing labor costs.
Frequently Asked Questions (FAQ)
Q1: Can this platform be used directly as a dispensing machine?
A: The platform is a base motion unit. It requires matching
dispensing valves, pressure/feeding systems, and a dispensing
controller to form a complete automatic dispensing machine. Full
customization solutions are available.
Q2: How to choose a dispensing valve for different adhesives?
A: Based on viscosity and type:
- Low viscosity (UV, instant adhesive): pneumatic or jet valves
- Medium/high viscosity (silicone, thermal grease): piston or screw
valves
- Two-component AB glue: static/dynamic AB mixing valves
- Provide your adhesive type and process requirements, and we will
recommend the best valve model.
Q3: What is the platform’s dispensing accuracy and repeatability?
A: Stepper version: ±0.05mm repeatability.
Servo upgrade: ±0.02mm repeatability, meeting most precision
dispensing needs.
Q4: What processes does it support?
A: Supports points, lines, surfaces, arcs, irregular trajectories,
enabling dispensing, coating, filling, line marking, and sealing.
Path editing is easy via handheld controller.
Q5: Can the platform add temperature or vision modules?
A: Supports temperature modules, CCD vision, dual-station
platforms, pressure control systems, etc., customized to your
process requirements.
Q6: Is programming difficult? Can beginners operate it?
A: Handheld interface is intuitive. Teach-by-hand programming
allows beginners to quickly generate programs with minimal
training.
Q7: Is maintenance complicated?
A: Simple: clean rails and screws, lubricate, periodically clean
dispensing valves, check air and power stability. For long idle
periods, empty adhesive to prevent clogging.
Provide your adhesive type, workpiece size, and process
requirements for a personalized dispensing solution.
