Molding sand rapid moisture analyzer QR-SFY
Main features:
1. Mainly used for rapid measurement of moisture content in casting
sand, molding materials, food, tobacco, pharmaceuticals, petroleum,
papermaking, feed, chemical industry, coatings, minerals,
environmental protection, geology and other industries
Ding. Simultaneously meet the requirements for determining the
moisture content of solids, particles, powders, gels, and liquids.
2. By using imported components and fast and sensitive weighing
sensors, very few samples can be accurately measured for moisture
content under high-precision weighing.
3. The measurement program, set value, moisture content,
measurement status, data number, and other important information
are displayed clearly at a glance.
4. Three drying programs, automatic, timed, and manual, fully meet
the measurement requirements of different samples,
5. Used for rapid determination of moisture content in molding
sand, with digital display of moisture content.
Technical parameters:
1.1 Determination method: drying reduction method; Temperature
range: Room temperature -180 ℃
1.2 Sample quality: 0.5-100g/any sampling method, division value:
1mg;
1.3 Minimum display position: moisture (solid content) 0.01%, mass
0.001g;
1.4 Measurement unit: moisture (wet basis, dry basis), mass, solid
content;
1.5 Measurement range: Wet basis, solid content: 0-100%; Dry basis:
0-500%;
