Touch Screen 22 Parameters Surface Roughness Gauges & Testers This Surface Roughness Tester is a high accuracy instrument for
measuring surface roughness. It can be used on variety of machining
parts and operates on various surfaces, not only flat but also
outer cone, outer cylinder, curved, pinholes, grooves, recesses
grooves and axle etc. The instrument allows surface roughness measurement both on metal
and non-metal workpieces. especially for measurement on large and
heavy workpiece, assembly line, on site. It is suitable for
machining and manufacturing, quality control, inspection
departments. It is a Non Destructive Testing instrument, damage won’t cause to
testing piece. Technnical Data | Parameter | Measure Range |
|---|
| Ra Rq | 0.005μm ~ 32μm | | Rz R3z Ry Rt Rp Rm | 0.02μm ~ 320μm | | RSk | 0 ~ 100% | | RS RSm | 0.02-1000μm | | tp | 0 ~ 100% |
| Measuring rang | The Z axis (vertical) | 320µm (-160µm~160µm) , 12600μin (-6300μin~+6300μin) | | The X axis (Transverse) | 17.5mm(0.69 inch) | | Resolution | the Z axis (vertical) | 0.002μm/±20μm, 0.004μm/±40μm 0.008μm/±80μm, 0.02μm/±160μm | | Parameter | Ra Rz Rq Rt Rp Rv R3z R3y Rz(JIS) Ry Rs Rsm Rsk Rku Rmax Rc Rpc Rk
Rpk Rvk Mr1 Mr2 | | standards | ISO4287,ANSI b46.1,DIN4768,JISb601 | | Assessed Graphic | Rmr curve, Roughness curve, Primary Profile | | Filter | RC,PC-RC,Gauss,D-P | | The sampling length(lr) | 0.25, 0.8, 2.5mm | | Assessment length(ln) | Ln= lr*n n=1~5 | | Sensor | Measuring principle | Differential Inductance | | Stylus tip | Diamond, 90°/ cone angle/5μmR | | Force | Measuring force<4mN, Skid force<400mN | | Probe head | hard alloy, skid radius of curvature: 40mm | | Measuring speed | lr=0.25, Vt=0.135mm/s lr=0.8, Vt=0. 5mm/s | | lr=2. 5, Vt=1mm/s Return Vt=1mm/s | | Accurate to | 0.001μm | | Tolerance | ≤±(5nm+0.1A) A=Ra standard value of precise specimen | | Residual Profile | ≤ 0.010μm | | Repeatability | ≤3% | | Power supply | Built-in Lithium ion battery 3200mAh, Charger :DC5V | | Outline dimension | Main unit: 158*55*52mm drive unit: 23*27*115mm | | Weight(main unit) | Around 380g | | Zoom of height adapter | 40mm | | working Environment | Temperature: - 20℃ ~ 40℃ Humidity: < 90% RH | | Store and Transportation | Temperature: - 40℃ ~ 60℃ Humidity: < 90% RH | | Optional accessory | Magnetic Base, height gauge adapter, curved sensor, small hole
sensor, deep groove sensor, pinhole sensor, Extending Rod, Right
Angle Rod, mini printer, 200mm platform, 300mm marble platform,
software, mobile APP |
Standard Packing List | ITEM | QTY |
|---|
| Host | 1 PC | | Sensor (non warranty parts) | 1 PC groove sensor KS130 | | Height adapter | 1 Set | | Calibration block | 1 PC | | Bracket for Calibration Block | 1 PC | | Extension cable | 1 PC length: 1m | | Touch pen | 1 PC | | Power Charger & USB Cable | 1 PC | | User manual | 1 PC | | Instrument case | 1 PC | | Warranty | 2 Years |
Optional Accesssories | Image | Description |
|---|
| KS55 - Extending Rod, extending rod increases the depth for pickup
to reach the part. extending 50mm long. | | KS90 - Right Angle Rod, change the position of the sensor, mostly
use for measure surface of particular groove. | | KS100 - Small Hole Sensor, measures flat surface, shaft in axial
direction ; when measure in inner hole, the diameter of inner hole
are required＞5mm, depth＞22mm. | | KS110 - Curved Surface Sensor, to measure smooth cylindrical
surface which radius is larger than 3mm, for the large radius
smooth spherical surface and other surface also can obtain good
approximation, need to work with platform KA520 or KA620. | | KS120 - very small Sensor, to measure the inner surfaces of holes
with radius more than 2mm, better to work with platform KA520 or
KA620. | | KS130 - Groove sensor, 1. measure flat surface when attached to
split type surface roughness tester. 2.For measuring in grooves up
to a depth of 3mm with width of 2mm, also to equipped with
Measuring fixture, allow measure cylindrical in axial direction. | | KS131 - Deep Groove Sensor, measuring in grooves up to a depth of
10mm with width of 3mm. used to measure the planar, cylindrical in
axial direction and work with platform KA520 or KA620 and other
stand to adjust height. | | KS132- 15mm Very Deep Groove Sensor, | | KA520 -Metal Substrate Working platform, adjustable height 200mm. With flexible and stable operation and wider application range.
Roughness of complex shapes can also be measured. Measurement stand
enable the adjustment of the position of stylus to be more precise
and measurement to be more stable. If Ra value of measured surface
is relatively low, Using measurement platform is recommended. | | KA620 -Marble Substrate Working Platform, adjustable height 300mm. With flexible and stable operation and wider application range.
Roughness of complex shapes can also be measured. Measurement stand
enable the adjustment of the position of stylus to be more precise
and measurement to be more stable. If Ra value of measured surface
is relatively low, Using measurement platform is recommended. | | Height Gauge, adjust testing height and angle. suit for for split
type surface roughness tester, allows more flexible and firm
measurement, Adjustable max height: 300mm. | | Standard Roughness Calibration Block Multi-engraved lines (Square
Wave) Made by optical glass, with high hardness, high accuracy standard
roughness value, anti-scratch, has longer life than metal roughness
block. Meet standard GB/T19067.1-2003 and ISO5436-1:2000 Approximation: Ra=0.1μm, 0.2μm, 0.4μm, 0.8μm, 1.6μm, 3.2μm, 6.4μm Customized Value and Sine Wave available, welcome to inquire. | | Standard Roughness Calibration Block Single engraved lines Made by optical glass, with high hardness, high accuracy standard
roughness value, anti-scratch, has longer life than metal roughness
block. Meet standard GB/T19067.1-2003 and ISO5436-1:2000 Approximation: H10-20μm (roughness tester use filter D-P, test RT
value) Customized Value available, welcome to inquire. | | Roughness Comparator (30 pcs/set) This set contains standards of the six most important machining
methods in the prevalent "AA" values. These surface roughness is
used to compare and determine the degree of the surface finish by
comparision method and eye estimation or magnifying glass.The
surface rough contast blocks is made of 45 super carbor steel
except the GCr15 which is using to plat lapping the sample block.
All 30 speciments are calibrated in u''AA (Arithmetical Average)
and in the metric equivalents um Ra. | | Charge and Cable for Surface Roughness Tester Charger: US and EU standard optional Cable: USB interface | | Mini thermal printer External printer, connect by USB interface, suitable for Kairda
models. | | Thermal printing paper Suitable for our mini thermal printer and other testers with
built-in printer Packing: 10pcs/bag - Paper Width : 57mm(56.18mm)Roll Diameter : Ø = 30 mm
|
|
