EC-666 Coating Thickness Gauges
| Product Name | Coating Thickness Gauges |
| Model Numbers | EC-666 |
| Range | 0~2000μm |
| Accuracy | ±(2%+1μm) |
【FEATURES】
- ruby probe
- With Bluetooth and mobile APP (EC-600S/SE)
- Response time up to 0.3 seconds
- Can work in low temperature as low as -40℃ (EC-600X)
- Resolution up to 0.1μm
- Accuracy ±(2%+1μm) (EC-600S/SE)
- Measuring range 0~2000μm
- Display the maximum, minimum, average and numbers of readings
- Can recall 10 measurements
- One button
- Zero calibration supported
- External probe optional (ET-600SE)
- Dot matrix display
- Automatic shut-down
- Low power protection
EC-600 coating thickness gauges can be used to measure the
thickness of non-conductive coatings on non-ferrous metals and
non-magnetic insulating coatings on ferromagnetic metals (such as
iron, nickel and cobalt, etc.). They are mainly used for
non-destructive thickness measurement for the coatings of paint or
galvanized layers on iron and stainless steel, paint or plastic
film on aluminum and copper, etc.
EC-600 is with internal probe combined with magnetic induction and
eddy currents principle, which is with measuring range of 0~2000μm
and accuracy of ±(3%+1μm), and the highest resolution is up to
0.1μm.
EC-600 is only with one button, and it is easy to operate. When you
start measurement, place the probe vertically and rapidly on a
suitable surface, then the device will automatically distinguish
the substrate material and measure the thickness of coatings.
EC-600X optimizes the principle on the basis of EC-600, and uses
OLED display to enhance the low temperature working performance.
Under the condition of using low temperature resistant battery, the
extreme working temperature of EC-600X can reach -50℃.On the basic
of EC-600, EC-600S is upgraded its probe and accuracy, and added
new functions. The EC-600S is with stronger anti-interference
ability compared with EC-600, and it can work in the high
electromagnetic fields environment. The accuracy of EC-600S is
±(2%+1μm), and the measurement result can be sent to the mobile APP
in real-time via bluetooth.
EC-600SE is with external probe version, the gauge can be equipped
with a variety of separated probes for easy replacement. EC-600SE
is better suited to work in narrower spaces or on assembly lines
compared with EC-600S.
