Automatic Flat Carton Labeling Machine with 100 CPM Output, ±1mm
Labeling Accuracy, and 150KG Weighted Rigid Body Product Introduction Model XT-TB630 Flat Carton Labeling Machine is specially built for
high-volume continuous mass production scenarios. It can achieve
high-speed and stable labeling at 100 cartons/min, with accurate
label feeding and smooth operation, no performance attenuation
during long-term high-speed operation, can be seamlessly docked
with high-speed production lines, and greatly improves mass
production efficiency. Key Technical Highlights - Peak labeling capacity up to 100 cartons/min, with a capacity
increase of more than 2 times compared with low-speed equipment,
greatly shortening the production cycle
- High-speed servo label feeding system, fast label feeding response
without delay, no label flying, missing labels and skewed labels
during high-speed operation
- 0-100 cartons/min stepless speed regulation, can accurately match
the rhythm of front and rear high-speed production lines, no
material jamming and accumulation
- 150kg weighted rigid body, no resonance and jitter during
high-speed operation, ensuring the stability of 24-hour continuous
mass production
- Maintain ±1mm labeling accuracy during high-speed operation within
the full specification adaptation range, balancing efficiency and
quality
Technical Specifications | Model No. | XT-TB630 |
|---|
| Power Supply Voltage | 220V 50Hz |
|---|
| Total Machine Power | 0.8KW |
|---|
| Labeling Accuracy | ±1mm (excluding errors in product and labeling) |
|---|
| Applicable Label Range | L 15-200mm, W 15-150mm |
|---|
| Applicable Product Range | W 25-200mm, H 25-300mm |
|---|
| Output | 100 CPM |
|---|
| Overall Dimensions | L1800*W700*H1500 (mm) |
|---|
| Net Weight | 150KG |
|---|
Frequently Asked Questions - Q: What is the maximum labeling speed of this labeling machine?A: The peak labeling capacity can reach 100 cartons/min, supporting
stepless speed regulation from 0 to 100 cartons/min.
- Q: Will there be label flying, missing labels and skewed labels
during high-speed operation?A: High-speed servo label feeding + precise photoelectric
positioning, accurate label feeding during high-speed operation,
with a labeling qualification rate of over 99.8%.
- Q: Can it run continuously at high speed for 24 hours?A: Yes. The weighted rigid body has no resonance, and the 0.8KW
low-energy low-heat design supports 7*24 hours continuous
high-speed mass production.
- Q: Will the labeling accuracy be affected during high-speed
operation?A: Stable labeling accuracy of ±1mm can be maintained in the full
speed range, balancing efficiency and quality.
- Q: How much is the capacity increased compared with conventional
labeling equipment?A: The peak speed of 100 cartons/min increases the capacity by more
than 2 times compared with conventional low-speed equipment.
- Q: Can it be docked with high-speed production lines?A: Yes. The stepless speed regulation can accurately match the
rhythm of front and rear high-speed production lines to realize
full-process linkage production.
- Q: Can large-size labels and products also achieve high-speed
labeling?A: Yes. Within the adapted size range, all specifications can
achieve high-speed and stable labeling without size restrictions.
- Q: Will there be inaccurate label feeding during long-term
high-speed operation?A: The servo label feeding system has no cumulative error, and can
maintain accurate label feeding without offset and dislocation
during long-term operation.
- Q: Is the high-speed speed regulation operation complicated?A: Visual stepless speed regulation interface, the speed can be
adjusted with simple operation, no complex debugging required.
- Q: Is the energy consumption of high-speed operation very high?A: The total rated power of the machine is only 0.8KW, even at full
speed operation, the energy consumption is extremely low, balancing
mass production and energy saving.
|
