Portable Potentiostat Galvanostat Handheld CS100ME With EIS

The CS100ME handheld potentiostat supports full electrochemical methods, including potentiostatic/galvanostatic polarization curve, Cyclic voltammetry analysis, impedance(EIS), and galvanic current measurement. etc. It has built-in chargeable li-ion battery and Bluetooth communication. The device supports laptop/computer software or mobile APP. It can be used for electrochemical tests in field or special non-electricity environment. CS100ME can be a convenient handheld tool for researchers of energy& materials, environment protection, biosensor, foods &drugs, corrosion protection etc. Maximum current is ±100mA

The voltage control range is ±10V, compliance voltage is ±10V, the maximum current output is ±100mA, and the minimum current resolution can reach 1pA. The EIS frequency range is 10μHz~1MHz.

Thanks to its small size with comprehensive electrochemical functions, it’s typically used for:

- Battery materials’ performance test in a glove box

- Ultra-low detection limit of heavy metal ions for water quality test in environmental protection field

- Low current detection in biosensor thanks to high current accuracy

- Effective ingredients detection in food and drug industry

- Outdoor bridge corrosion and soil corrosion measurements

Note: maximum current during experiment doesn’t exceed ±45mA then the handheld potentiostat can be used. If exceeds ±45mA an ordinary size potentiostat with maximum current ±2A should be considered.

Features

- Small & light, handheld and convenient

- Easy to install and use

- High accuracy, current resolution can reach to 1pA, and measurement accuracy is 0.1% of the range.

-during outdoor test, a laptop’s USB port can be used for both charging and communicating

- The circuit adopts floating design. Electrochemical parameters of the grounded system can be measured without an isolation transformer.

Specifications of the portable potentiostat

Size / weight:15 x 9 x 3 (cm), 500g

Communication: USB / Bluetooth

Power supply: USB / built-in Li-ion battery 10AH@3.7V

Support 2-, 3-or 4-electrode system

Maximum current: ± 100mA

Potential control range: ±10V

EIS frequency range: 10μHz ~ 1MHz

Compliance voltage: ±10V

Current range: 200pA~200mA, 10 ranges

Potential range:±200mV ±2V, ±5V, ±10V

Potential accuracy: 0.1%× full range

Minimum potential resolution: 1mV

Current accuracy: 0.1%× full range

Minimum current resolution: 1pA

Reference electrode input impedance: 10¹³Ω||8pF

AC amplitude: 0~±2.5V

Signal response bandwidth: 1MHz

Max. acquisition rate: 150,000 data points/s

CV and LSV scan rate: 0.001mV~ 10V/s

Electrochemical techniques- handheld potentiostat CS100ME

Stable polarization

• Open Circuit Potential (OCP)
• Potentiostatic (I-T curve)
• Galvanostatic
• Potentiodynamic (Tafel plot)
• Galvanodynamic (DGP)

Transient Polarization

• Multi Potential Steps
• Multi Current Steps
• Potential Stair-Step (VSTEP)
• Galvanic Stair-Step (ISTEP)

Chrono Method

• Chronopotentiometry (CP)
• Chronoamperametry (CA)
• Chronocaulometry (CC)

Voltammetry

• Linear Sweep Voltammetry (LSV)
• Cylic Voltammetry (CV)
• Staircase Voltammetry (SCV) #
• Square Wave Voltammetry (SWV) #
• Differential Pulse Voltammetry (DPV) #
• Normal Pulse Voltammetry (NPV)#
• Differential Normal Pulse Voltammetry (DNPV) #
• AC Voltammetry (ACV)
• 2^nd harmonic AC Voltammetry (SHACV)
• Fourier Transform AC Voltammetry (FTACV)

# there is correspinding Stripping Voltammetry

Electrochemical Impedance Spectroscopy (EIS)

• Potentiostatic EIS (Nyquist, Bode)
• Galvanostatic EIS
• Potentiostatic EIS (Optional freq.)
• Galvanostatic EIS(Optional freq.)
• Mott-Schottky
• Potentiostatic EIS vs. Time (Single freq.)
• Galvanostatic EIS vs. Time (Single freq.)

Corrosion Measurements

• Potentiodynamic (Tafel plot)
• Cyclic polarization curve (CPP)
• Linear polarization curve (LPR)
• Electrochemical Potentiokinetic Reactivation (EPR)
• Electrochemical Noise (EN)
• Zero resistance Ammeter (ZRA)

Battery test

• Battery Charge and Discharge
• Galvanostatic Charge and Discharge (GCD)
• Potentiostatic Charging and Discharging(PCD)
• Potentiostatic Intermittent Titration Technique(PITT)
• Galvanostatic Intermittent Titration Technique(GITT)