Product Description
The XHHV535-4TS high voltage pulse generator can be used impulse discharge and withstand voltage test in low and
high voltage cable fault test. High-precision test cable fault sampling waveform module and small
transformer are installed inside, which can truly achieve the
effect of not being damaged by impact, and it also has the
functions of automatic timing impact, manual impact and withstand
voltage test.
This device integrates a high-voltage DC source, an energy storage
capacitor, a discharge ball device, an automatic discharge device,
and a voltage level switching device into a cart-type high-end
experimental instrument. It is a trolley-type high-end experimental instrument. The equipment
completely solves the problems of ease of use, portability, safety
and reliability of traditional experimental devices.
When the XHHV535-4TS trolley-type high-voltage pulse generator is in use, after selecting the function switch, press the start
button to perform high-voltage boosting work. After use, press the
stop button, and the internal system will automatically release the
remaining high voltage on the accumulator.
The high voltage surge generator also has the function of zero-start protection, which can make the
operation of the device more safe and reliable. It has super
short-circuit protection function, which can make the high-voltage
output work directly to the ground. With three-gear voltage range and capacitance capacity switching
function, users can choose different equipment voltage adaption gears
according to different cable voltage needs, making the test process
easier.
Product Parameters | Impulse high voltage | 0~32kV, 0~16kV, 0~8kV three gear adjustment | | High voltage partial pressure | 1.5 level | | Built-in capacitor | 4μF/32kV,16μF/16kV,64μF/8kV Adjustable three-speed adjustment | | Discharge power | both are 2048J | | Impact power | 2KVA | | Output voltage polarity | negative polarity | | Impact time | about 5 seconds for automatic impact, arbitrary control time for
manual impact | | Over temperature protection | 85ºC | | Power supply | AC220V±10%, 50Hz±2Hz(60Hz can be customized) | | Ambient temperature | -20~+50ºC |
On-site test |
