Inflatable Dinosaur Bounce House With Slide Jumping Castle For Kids

Inflatable Dinosaur Bounce House with Slide

This picture showcases a castle-themed inflatable playground with typical blue, gray and orange color schemes. On top of the facility is a green dragon sculpture with yellow spots on its body and a red crown-like feature on its head. The tail seems to drape down from one side. The front of the castle has two arched windows, while the sides have three similar ones, and the edge of the roof is decorated with patterns resembling bricks.

In addition, there are two blue cone-shaped towers on each side, adding to the authenticity of the castle. The entire structure looks sturdy and vibrant, very attractive to children’s attention. The jumping part of the inflatable castle is dark gray, adorned with many light gray rectangular patterns arranged in rows, connected by thin black lines between them. At the bottom of the inflatable castle is a flat pale blue platform with two steps leading into the castle interior.

Specifications:

Descriptions:

1. Wokmanship :double stitching with fourfold stitching at the bottom stress point , double stitching inside and double stitching outside , to make sure that it is strong enough and can stand a very big stress . Besides , we also reinforce strips at the joints , so you don't need to worry about the safety at all , the bottom can bear the kids no matter how they play on the castle .

2. Material :Our factory always use real and best materials, PVC Tarpaulin , purchased from professional factory , which has 3 layers ,with double coated side with a strong net inside , It can be waterproof and fire-retardant , with CE,EN14960,SGS certificates , good quality and durable .You know , best material is very important for all the inflatable products , good quality and durable , use 3 years at least , 24 hours working all the time , it is not a problem .

3.Type:constant blowing type, you need to inflate it constantly by using blower connecting electricity, It is very fast to be put up and taken down . For all the inflatable castles , they are constant blowing type , with a very good bounce .

4. Inflating: you can connect the blower and the blower tube , then turn on the electricity power , the castle can be inflated ,about 2-3 minutes . For deflating , you only need to turn off the power , it can be deflated within 2-3 minutes. Besides , we also make a strong zipper at the bottom of the castle , you open the zipper , which can help you deflate it more quickly . Above the zipper , there is a zipper cover , which is help to disperse the zipper's stress.

Why choose us

1. High durability and best material

2. Double and strong stitching

3. Very strong ,safe and steady

4. long life , use 3 years at least

5. Good printing and perfect artwork

6. Cheap price and good quality

7. Best after-sale service

8. very fast to inflate and deflate

9. on-time delivery and safe shippment

10. OEM accepted

11. Good quality and durable

12. Easy to get it repaired , only need spare material and glue

FAQ

Q: How to repair when damage?

A:

Step 1: Identify the Damage

Thoroughly inspect the inflatable to locate any tears, punctures, or leaks.

Step 2: Clean and Dry the Area

Clean the damaged area with mild soap and water to remove dirt or debris. Allow the area to dry completely before proceeding with the repair.

Step 3: Patch the Damage

Apply a patch specifically designed for inflatable repairs over the damaged area. Make sure the patch is slightly larger than the damaged area to ensure proper coverage. Press the patch firmly onto the surface, smoothing out any wrinkles or air bubbles.

Step 4: Apply Adhesive

If using a patch that requires adhesive, apply a thin, even layer of adhesive to both the patch and the inflatable surface. Allow the adhesive to become tacky before pressing the patch onto the surface.

Step 5: Allow Time to Cure/Allow the Adhesive to Dry

Once the patch is in place, you'll need to allow the adhesive to dry completely. This may take several hours, depending on the type of adhesive you are using. It's important to avoid using the inflatable until the adhesive is completely dry, as this could cause the patch to come loose. Wait at least 1 hour before inflating again.

Step 6: Test the Repair

Once the patch has cured, inflate the inflatable and check for any signs of leakage. If the repair holds, the inflatable is ready to be used again.

It's important to use repair materials specifically designed for inflatables and follow the manufacturer's instructions carefully to ensure a successful repair. If the damage is extensive or beyond your ability to repair, consider seeking professional assistance.

-

Q: Accessories included?

A: Free accessories include Storage Bag / Repair Kit / Warning Label / Custom Logo .