Customizable Urban Underground Domestic Rainwater Sewage Pumping
Station For Drainage
GRP integrated pump station is a common equipment that provides
potential energy and pressure energy for water through water pumps
to solve the problem of irrigation and drainage and sewage
discharge under non-self-flow conditions. It can be prefabricated
in our factory according to customer needs and shipped after
installation. The wellbore of the integrated pump station is made
of customized materials, and the interior includes water pumps,
grilles, pipelines, valves, instruments, control equipment, and
maintenance facilities, etc., to ensure the cost-effectiveness and
operational reliability of the system to the greatest extent. It
has outstanding performance in both urban waterlogging prevention
and control and rainwater and sewage collection and treatment.
Within two weeks, we can complete all the processes including
excavation, backfilling, compaction, connection, leakage test,
control system installation, trial operation, final commissioning
and document record. This will save a lot of pump station
installation time, saving time up to 80%. More importantly, it can
solve a series of problems such as leakage and corrosion, water
pump failure, silt deposition, environmental pollution, frequent
maintenance and high cost of traditional pump stations.Sewage lifting pump station is a facility used to lift sewage from
a lower place to a higher place. In some cases, due to terrain or
other reasons, sewage cannot flow into sewage treatment facilities
or discharge points by natural gravity, so it needs to be lifted to
a sufficient height by lifting pumping station.A sewage lifting pump station usually includes the following main
parts: Catchment Basin: This is a place for temporary storage of sewage, which can be an
underground concrete tank or a closed steel container.
Sewage pump: This is the core equipment of the lifting pump station, which is
used to lift the sewage from the sump to the required height.
According to the type and design of the pump, it can be divided
into centrifugal pump, submersible pump, self-priming pump and so
on.
Control system: The control system is responsible for controlling the start and
stop of the sewage pump to ensure the normal operation of the pump
station. Generally, it will include liquid level sensor, motor
protector, control box and so on.
Pipeline system: including water inlet pipes, outlet pipes, bypass pipes, etc., used
to transport sewage to where it is needed.
Other equipment: such as backup pumps (in order to prevent the failure of the main
pump), inspection wells (for inspection and maintenance), gas
treatment equipment (to deal with the foul gas produced in the
sump), etc. Product Parameters| Frp Integrated Pump Station | | Product Name | FRP Integrated Pump Station | | Keywords | FRP Products | | Components | Standard Materials | | Cylinder | Fiber-Wound Fiberglass Reinforced Plastic (GRP) | | Shaft Cover | Fiber-Wound Fiberglass Reinforced Plastic (GRP) | | Manhole Cover | Aluminum Alloy Patterned Plate | | Handrail | Stainless Steel (SUS304) | | Ventilation Pipe | Stainless Steel (SUS304) | | Pipeline | Stainless Steel (SUS304) | | Check Valve | Rubber Plate Cast Iron Valve Body | | Gate Valve | Rubber Plate Cast Iron Valve Body | | Flexible Joint | Hot-Dip Galvanized Flange/Rubber | | Water Pump | Cast Iron (HT250) | | Coupling Device | Cast Iron (HT200) | | Guide Rail/Guide Chain | Stainless Steel (SUS304) | | Ladder | Aluminum Alloy | | Maintenance Platform | Hot-Dip Galvanized Steel + Stainless Steel Frame | | Crushing Grid | Cast Iron Housing Alloy Blade | | Basket Grid | Stainless Steel (SUS304) | | Bolts And Nuts | Stainless Steel (SUS304) | | Pressure Plate | Cast Steel (ZG500) | | Anchor Standard Parts | Hot-Dip Galvanized Steel | | Electric Control Cabinet Housing | Stainless Steel (SUS304) | | *All Product Parameters Are Subject To The Actual Product Received. |
|
