Wireless UGV Datalink for Unmanned Vehicles & Robotic Platforms
Introduction
IWAVE is a leading developer of wireless data and video
transmission solutions for use on unmanned aerial vehicles (UAVs),
unmanned ground vehicles (UGVs), unmanned surface vehicles (USVs),
and other robotic platforms.
Based on a proprietary software-defined radio (SDR) architecture,
our products utilize customized video and data transmission
algorithms and IWAVE's proprietary waveforms to deliver an
unmatched combination of range, reliability, and bandwidth. Our
solutions are ideal for drone and robotics original equipment
manufacturers (OEMs), customization of existing commercial
off-the-shelf drone platforms, and some mini robotic systems.
IWAVE's proprietary network management software provides real-time
visibility into all node topology, inter-node distances, and each
node's RSSI and SNR, enabling the creation of a mesh network for
secure and reliable communications. All IWAVE radios utilize AES128
encryption to ensure the security and integrity of mission-critical
data and imagery.
Key Features of Wireless UGV Datalink for Unmanned Vehicles &
Robotic Platforms 1. Robust Connectivity - 2*2 MIMO technology provides strong signal stability in dynamic
environments
- 23dBm high power output enables long-range operation (1-3 km
non-line-of-sight) with excellent penetration.
2. Military-Grade Security - AES128 encrypted link prevents interception and unauthorized access
- Advanced anti-jamming features: intra-band frequency hopping and
cross-band frequency hopping
3. High-Speed Data Transfer - 100Mbps throughput supports real-time HD video streaming over IP
- Adaptive bandwidth allocation optimizes data flow
4. Scalable Network Architecture - Supports 8-node mesh networks with flexible ad hoc networking and
network scalability
- Intelligent relay functionality extends operational range
5. Compact Battlefield Solution - Ultra-light design (281g) with a compact footprint (12.7*9.4*1.8cm)
- Dual-band (600MHz/1.4GHz) for enhanced mission adaptability and
anti-jamming capabilities
| |
Key Features of Wireless UGV Datalink for Unmanned Vehicles &
Robotic Platforms
Wireless UGV Datalink for Unmanned Vehicles & Robotic Platforms | Various Interfaces The rich interfaces enable users to connect various terminals. - RJ45 ports: users can connect the IP camera, sensors, onboard
microcomputers such as Linux/windows/Android...
- Serial port: It can connect with PTZ, flight control such as
pixhawk
- USB: It can be used for debugging and AT commands sending or
enumerate it as network port or AT command port.
- Expansion Port: It is 20pin port for uses to define more interface
and single-chip microprocessor application, download port, power
port, etc.
|
Application
The FD-7800 measures just 72 x 60 x 10 mm and weighs only 33g. With
its compact form factor, the FD-7800 is specifically designed for
anti-interference environments, making it ideal for installation as
a mobile station system in ground, aerial, and maritime
applications—such as micro drones, mini robots, or other unmanned
systems with limited space. Featuring a wide input voltage range of 5 to 32V and a power
consumption of just 5W, the FD-7800 is exceptionally suited for
power-critical unmanned vehicle applications, helping to extend
battery life. - Pipeline detection/disposal
- Fire rescue
- Route clearance
- Combat engineering
- UGV/Robot dog swarm
| |
Specification
| General | Wireless |
| Technology | MESH Network based on IWAVE proprietary time slot frame structure
& waveform. | Communication | 1T1R1T2R2T2R |
| Encryption | ZUC/SNOW3G/AES(128) Optional Layer-2 | Data Link | Full duplex communication |
| Data Rate | Max 100Mbps(Uplink and Downlink) | Up and Down Ratio | 2D3U/3D2U/4D1U/1D4U |
| Range | Non-line-of-sight 1-3km | Auto Reconnection | Automatic link re-establishment after link failure/ re-deploy the
network after a link failure |
| Capacity | 8nodes | Sensitivity |
| MIMO | 2x2 MIMO | 1.4GHZ | 20MHZ |
| Power | 23dBm±2 (2w, 5w or 10w on request) | 10MHZ |
| Latency | End to end≤5ms-15ms | 5MHZ |
| Modulation | QPSK, 16QAM, 64QAM | 600MHZ | 20MHZ |
| Anti-jam | FHSS(Frequency Hop Spread Spectrum) | 10MHZ |
| Bandwidth | 1.4Mhz/3Mhz/5Mhz/10MHz/20MHz/40Mhz | 5MHZ |
| Power Consumption | 5Watts | Dual Frequency Band |
| Power Input | DC5-32V | 1.4Ghz | 1420Mhz-1530MHz |
| Dimension and Weight | 71*60*10mm/33g | 600Mhz | 566Mhz-678Mhz |
