Advanced FHSS Communication Data Link For Long-Range Video And Data
Transmission
Description
The FDM-615PTM is an advanced wireless communication module leveraging Frequency Hopping Spread Spectrum (FHSS) technology for superior immunity to noise and interference. It
delivers reliable, long-distance, full-duplex Ethernet/serial communication in a compact and robust form factor, making it ideal for micro
unmanned platforms. Multiple bandwidth option 1.4Mhz/3Mhz/5Mhz/10Mhz/20Mhz High Transmitting RF power: 40dBm Light weight:305g 800Mhz/1.4Ghz/2.4Ghz frequency options Automatically power control according to the real time signal
quality 3* Ethernet Port support TCPIP and UDP and other IP based devices
to connect with
| |
Key Features: Robust Long-Range Communication Offers clear and stable NLOS video transmission with a range of 1-10 km for ground-to-ground applications. High-Definition Video Transmission Supports real-time HD 1080P60 video streaming at data rates of 8-12 Mbps over distances of 1-10 km. Short Latency Features ultra-low latency of 60ms to 80ms, ensuring seamless control and real-time video monitoring. Multi-Frequency Operation Operates in UHF, L Band, and S Band, with frequency options including 800MHz and 1.4GHz. Utilizes Automatic Frequency Hopping Spread Spectrum (FHSS) for optimal channel selection and interference avoidance.
IWAVE provide long range non-line-of-sight video transmitter
receiver system for logging machines and cable yarding system.Cable yarder systems are often the preferred harvesting system when
logging trees on steep terrain. While the logging carriage always
need to move away to pick up the wood and this distance can be out
of line of sight when working on convex terrain. The operator site
inside the cab need to observe a video screen about the logging
carriage so that he can operate the logging machines safely and
efficiently.
| GENERAL | | Technology | Wireless based on TD-LTE Technology Standards | | Encryption | ZUC/SNOW3G/AES(128) OptionalLayer-2 | | Data Rate | 30Mbps(Uplink and Downlink) | | Range | 100km-150km(air to ground) | | Capacity | 32Nodes | | NLOS Range | 5-10km nlos ground to ground | | RF Power | 10Watts | | Latency | End to End: 60ms-80ms | | Modulation | QPSK, 16QAM, 64QAM | | Anti-jamming | Automatically frequency hopping | | Bandwidth | 1.4Mhz/3Mhz/5Mhz/10MHz/20MHz |
| SENSITIVITY | | 2.4GHZ | 20MHZ | -99dBm | | 10MHZ | -103dBm | | 5MHZ | -104dBm | | 3MHZ | -106dBm | | 1.4GHZ | 20MHZ | -100dBm | | 10MHZ | -103dBm | | 5MHZ | -104dBm | | 3MHZ | -106dBm | | 800MHZ | 20MHZ | -100dBm | | 10MHZ | -103dBm | | 5MHZ | -104dBm | | 3MHZ | -106dBm |
| FREQUENCY BAND | | 2.4Ghz | 2401.5-2481.5 MHz | | 1.4Ghz | 1427.9-1447.9MHz | | 800Mhz | 806-826 MHz |
| POWER | | Power Input | DC 24V±10% | | Power Consumption | 30watts |
| COMUART | | Electrical Level | 2.85V voltage domain and compatible with 3V/3.3V level | | Control Data | TTL mode | | Baud rate | 115200bps | | Transmission Mode | Pass-through mode | | Priority level | l Higher priority than the network port. When the signal
transmission is crowed, the control data will be transmitted in
priority | | Note:l The data transmitting and receiving is broadcast in the
network. After successful networking, each FDM-615PTM node can
receive serial data.l If you want to distinguish between sending,
receiving and control, you need to define the format yourself |
| INTERFACES | | RF | 2 x SMA | | Ethernet | 1xJ30 | | COMUART | 1xJ30 | | Power | 1xJ30 | | Debug | 1xJ30 |
|
