Tactical Wirelss Software Defined Radios Transceivers for Unmanned
Systems
Introduction
FD-610X is a broadband data transmission Software Defined Radios
that supports MESH networking. Based on the LTE terminal wireless
communication standard, FD-610X adopts OFDM and MIMO technology and
supports multiple bandwidth allocations (1.4MHz, 3MHz, 5MHz, 10MHz,
20MHz).
IWAVE is at the forefront of developing next-generation broadband
tactical data links, specializing in advanced wireless
communication solutions for unmanned systems. Our cutting-edge
radio embedded SoC communication systems, utilizing OFDM and MIMO
technology, deliver exceptional range and stability, making them
ideal for high-mobility platforms such as unmanned aerial vehicles
(UAVs), unmanned ground vehicles (UGVs), and unmanned surface
vessels (USVs).
Using AT command to remotely control a UAV swarm
High-rate serial port data transmission: the baud rate is up to
460800 Multiple working modes of the serial port: TCP Server mode, TCP
Client mode, UDP mode, UDP multicast mode, transparent transmission
mode, etc. MQTT, Modbus and other protocols. Supports serial port IoT
networking mode, which can be used flexibly for networking. For
example, users can accurately send control instructions to another
node (drone, robot dog or other unmanned robotics) through a remote
controller instead of using broadcast or multicast mode. | | |
Specification
Software Defined Radios (SDRs) and IP Mesh Radios for UAV, Drones,
UGVs and Robotics
| Transmitting | Master control module image acquisition device for data acquisition
and encoding | Camera |
| The main control module send the encoded data to FD-610X through
the USB or HSIC interface | Physical interface USB/HISC, logically virtual into a network card |
| Receiving | FD-610X sends the encoded image data to the receiving end through
the air interface. | |
| The FD-610X receiving end gets the encoded image data and then
transparently transmits it to the main control module. | |
| FD-610X sends data to the main control module via USB or HSIC
interface. | Physical interface USB/HISC, logically virtual into a network card |
| After the main control module receives data, it performs image
decoding and display. | |
| PCB Size | 43.40*45.00*3.00mm | Tolerance |
| 43.40±0.15mm |
| 45.00±0.15mm |
| 3.00±0.10mm |
| RF | Frequency | 2.4Ghz: 2401.5-2481.5 MHz |
| 1.4Ghz: 1427.9-1467.9MHz |
| 800Mhz: 806-826 MHz |
| RF Power Level | 25dBm |
OEM/ODM Service:
If you want to display your own brand LOGO on the goods such as
cable, package bag, label or any where. It is no any problem. Our
OEM and ODM service is always ready to do it.
If you want to second develop this Software Defined Radios to
your own system or device, IWAVE R&D team will fully support
you with footprint drawing, pinout and reference
schematic document.
Packing:
According to Stardard Export Packing.
Carton box, wooden box, wooden pallet.
Shipping:
- International express such as UPS, TNT, DHL, etc
- Internatioal air: CA, AA, EA, etc
- By sea
