GENERAL | TECHNOLOGY | MESH base on TD-LTE Wireless technology standard | ENCRYPTION | ZUC/SNOW3G/AES(128) OptionalLayer-2 | DATA RATE | 30Mbps(Uplink and Downlink) | RANGE | 10km(Air to ground)500m-3km(NLOS Ground to ground) | CAPACITY | 16nodes | POWER | 23dBm±2 (2w or 10w on request) | LATENCY | One Hop Transmission≤30ms | MODULATION | QPSK, 16QAM, 64QAM | ANTI-JAM | Automatically Cross-Band frequency hopping | BANDWIDTH | 1.4Mhz/3Mhz/5Mhz/10MHz/20MHz | POWER CONSUMPTION | 5Watts | POWER INPUT | DC12V |
SENSITIVITY | 2.4GHZ | 20MHZ | -99dBm | 10MHZ | -103dBm | 5MHZ | -104dBm | 3MHZ | -106dBm | 1.4GHZ | 20MHZ | -100dBm | 10MHZ | -103dBm | 5MHZ | -104dBm | 3MHZ | -106dBm | 800MHZ | 20MHZ | -100dBm | 10MHZ | -103dBm | 5MHZ | -104dBm | 3MHZ | -106dBm |
FREQUENCY BAND | 2.4Ghz | 2401.5-2481.5 MHz | 1.4Ghz | 1427.9-1447.9MHz | 800Mhz | 806-826 MHz |
COMUART | Electrical Level | 2.85V voltage domain and compatible with 3V/3.3V level | Control Data | TTL mode | Baud rate | 115200bps | Transmission Mode | Pass-through mode | Priority level | Higher priority than the network portWhen the signal transmission is crowed, the control
data will be transmitted in priority | Note:1. The data transmitting and receiving is broadcast in the
network. After successful
networking, each FD-6100 node can receive serial data. 2. If you want to
distinguish between sending, receiving and control, you need
todefine the format yourself |
MECHANICAL | Temperature | -40℃~+80℃ | Weight | 50grams | Dimension | 7.8*10.8*2cm | Stability | MTBF≥10000hr |
INTERFACES | RF | 2 x SMA | ETHERNET | 1xEthernet | COMUART | 1x COMUART | POWER | DC INPUT | INDICATOR | Tri-COLOR LED |
>
|