Introduction The FD-6100 is a compact, tri-band OEM digital data link operating
in the 800MHz, 1.4GHz, and 2.4GHz frequency bands. It is perfectly
suited for surveillance and video broadcasting applications in UAVs
(Unmanned Aerial Vehicles) and UGVs (Unmanned Ground Vehicles). IP
Mesh radios offer a reliable and adaptable MANET (Mobile Ad-hoc
Network) solution for even the most demanding environments. The
FD-6100 ensures a strong and secure connection across all three
frequency bands, employing FHSS (Frequency Hopping Spread Spectrum)
technology and leveraging the high sensitivity of the TD-LTE
technology standard to deliver robust RF performance. Its
high-speed, long-range capabilities enable high-quality wireless
video and telemetry communications. Key Features - Self-healing fluid mesh design optimized for mobile applications
- Data Rates: 30Mbps (combined Uplink and Downlink)
- Tri-band frequency operation (800MHz/1.4GHz/2.4GHz, selectable via
software)
- OEM (bare board) format for seamless platform integration
- Long range Line-of-Sight (LOS) for UAVs: 10km (Air to Ground)
- Adjustable Total Output Power up to 25dBm
- Supports up to 8 nodes on a single frequency MESH network
- RF Power Adjustable Range: -40dBm to +25dBm
- Supports Mesh, Point-to-Multipoint, and Point-to-Point
configurations
- Simultaneous IP and Serial Data transmission
- Operating Temperature range: -40°C to +80°C
- 128/256-bit AES Encryption for security
| |
Application FD-6100 enables self-forming and self-healing mesh networks. Mesh
networks improve robustness, extend range and simplify
collaborative communication. It is ideal for size and weight
critical UxV applications, offering the SWaP of a bare-board
solution for platform and system integration. - Ideal for use for wide area coverage & multi-hop, mobile
applications such as robotics
- Tactical communications
- Unmanned land vehicles wireless video transmission
Specification | GENERAL | | TECHNOLOGY | MESH base on TD-LTE Wireless technology standard | | ENCRYPTION | ZUC/SNOW3G/AES(128) OptionalLayer-2 | | DATA RATE | 30Mbps(Uplink and Downlink) | | RANGE | 10km(Air to ground)500m-3km(NLOS Ground to ground) | | CAPACITY | 8 nodes | | POWER | 23dBm±2 (2w or 10w on request) | | LATENCY | One Hop Transmission≤30ms | | MODULATION | QPSK, 16QAM, 64QAM | | ANTI-JAM | Automatically Cross-Band frequency hopping | | BANDWIDTH | 1.4Mhz/3Mhz/5Mhz/10MHz/20MHz | | POWER CONSUMPTION | 5Watts | | POWER INPUT | DC12V |
| SENSITIVITY | | 2.4GHZ | 20MHZ | -99dBm | | 10MHZ | -103dBm | | 5MHZ | -104dBm | | 3MHZ | -106dBm | | 1.4GHZ | 20MHZ | -100dBm | | 10MHZ | -103dBm | | 5MHZ | -104dBm | | 3MHZ | -106dBm | | 800MHZ | 20MHZ | -100dBm | | 10MHZ | -103dBm | | 5MHZ | -104dBm | | 3MHZ | -106dBm |
| FREQUENCY BAND | | 2.4Ghz | 2401.5-2481.5 MHz | | 1.4Ghz | 1427.9-1447.9MHz | | 800Mhz | 806-826 MHz |
| COMUART | | Electrical Level | 2.85V voltage domain and compatible with 3V/3.3V level | | Control Data | TTL mode | | Baud rate | 115200bps | | Transmission Mode | Pass-through mode | | Priority level | Higher priority than the network portWhen the signal transmission
is crowed, the control data will be transmitted in priority | Note:1. The data transmitting and receiving is broadcast in the
network.
After successful networking, each FD-6100 node can receive serial
data.
2. If you want to distinguish between sending, receiving and
control, you need to
define the format yourself |
| MECHANICAL | | Temperature | -40°C~+80°C | | Weight | 50grams | | Dimension | 7.8*10.8*2cm | | Stability | MTBF≥10000hr |
| INTERFACES | | RF | 2 x SMA | | ETHERNET | 1xEthernet | | COMUART | 1x COMUART | | POWER | DC INPUT | | INDICATOR | Tri-COLOR LED |
|
