271 - 280 of 310
engine protection oil seal
Selling leads
|
...low pressure, one side with sealing medium and the other side with light dust. Highest pressure 0.03mpa(0.3kgf/cm2). Characteristics of FKM: ...
2026-04-27 00:28:28
|
|
...oil seals (ISO 6194 compliant), designed for rotary sealing to retain lubricants and block contaminants. Each type differs in lip count, skeleton ...
2026-04-27 00:28:28
|
|
... steel skeleton is fully wrapped in rubber, rotary seal, used in low pressure, one side with sealing medium and the other side with light dust. ...
2025-02-24 20:30:10
|
|
... skeleton and clamping spring. The rubber body has elasticity and sealing performance, and is the core part to realize the seal; the steel skeleton ...
2025-02-24 20:30:11
|
|
...Shipbuilding field How to determine whether the oil seal needs to be replaced: Oil leakage: After the equipment stops, observe whether there is oil ...
2026-04-27 00:28:28
|
|
...other parts, as a substitute for the end flange or end cover, the rubber layer at the outer diameter ensures that the oil seal seat is not easy to ...
2025-02-24 20:30:12
|
|
...Oil Seal Waterproof Fully Dimensioned Seal Ring Single Lip Skeleton Oil Seal SC TYPE Single lip Single spring Rotating seal Maximum pressure 0.03 ...
2026-04-27 00:28:28
|
|
...Seal Ring Air Compressor Oil Seals Double Lip Oil Seal For Machinery Product Information The EC type oil seal has a well-designed structure. It ...
2025-02-24 20:30:01
|
|
...Oil Seals Double Lip O Ring Oil Seal Mechanical Pump Oil Sealing Composition The outer layer is an iron shell Designed for steel rotating shafts or ...
2025-02-24 20:30:11
|
|
... shafts or cast iron pool holes. For sealing, single lip with spring, low coefficient of friction, pressure resistance about 0.03Mpa. The oil seal ...
2025-05-14 08:31:26
|