111 - 120 of 211
double lip mechanical seals
Selling leads
|
...) Normal working temperature is usually between -40℃ and 120℃. Oil resistance, commonly used in general industrial equipment and automotive oil ...
2025-07-29 00:22:52
|
|
...dust protection. There is also a spring inside to provide better sealing performance and self-tightening The outer diameter is covered with rubber ...
2025-07-29 00:22:52
|
|
... reciprocating seals, approx. 0.03 MPa. In terms of structural design, TG4 oil seal adopts a unique double lip structure. The main lip closely fits ...
2025-07-29 00:22:52
|
|
... seal, used in low pressure, one side with sealing medium and the other side with light dust. Highest pressure 0.03mpa(0.3kgf/cm2). Applications ...
2025-02-24 20:29:51
|
|
... Seals Machine Rotary Shaft Oil Seal For Temperature Environments TCV TYPE:Outer layer is rubber, inner skeleton, double lip with spring, ...
2025-07-29 00:22:52
|
|
Mechanical Servo Motor Oil Seals Nitrile Rubber Oil Seal Black And Gray Structure Design Single lip structure: with one sealing lip, directly ...
2025-07-29 00:22:52
|
|
...low pressure, one side with sealing medium and the other side with light dust. Highest pressure 0.03mpa(0.3kgf/cm2). Characteristics of FKM: ...
2025-07-29 00:22:52
|
|
...lip seal. It belongs to rotary oil seal, which is used for sealing in oil, and dusty occasions, resistant to pressure within 0.03MPa (0.3kgf/m2), ...
2025-07-29 00:22:52
|
|
...Seal Gear Reducer Oil Seals Valve Oil Seal Heat Resistant Composition The outer layer is an iron shell Designed for steel rotating shafts or cast ...
2025-02-24 20:30:16
|
|
...Seals FKM Oil Seal Rubber Seal Ring Wear And Oil Resistant Description DB type: The lip of the outer skeleton is rubber, with springs on both sides...
2025-07-29 00:22:52
|