| System | System structure | 1 control cabinet + 2 aging cabinets + 1 water temperature cabinet |
| Overall size | 6900*1600*2050mm |
| Total floor area | 6900*2500mm(Including operation area) |
| Total input voltage | Three-phase five-wire system 220Vac (rated) |
| Total input current | 100A |
| Total input power | 35kW |
| Application ambient temperature | 0-40℃ |
| Application environment humidity | 0-95% |
| Fire protection requirements | Materials meet UL 94V0 rating |
| Environmental requirements | Materials comply with Rohs, WEEE requirements |
| Safety requirements | Comply with IEC62368 international standard design requirements |
| Burn-in cabinet | Burn-in bits/cabinet | 16 bits/cabinet |
| Burn-in bits/layer | 4 bits/layer |
| Burn-in product power | 7.5kW/bit |
| Burn-in product input voltage | 50-800Vdc |
| Low voltage voltage of Burn-in products | 8-30V |
| Burn-in product battery current | 240A/bit |
| Burn-in product AC power | 7kW/bit |
| Burn-in products AC voltage | 220/380Vac/50Hz three-phase five-wire |
| Burn-in product AC current | 32A/bit |
| AC Connector Type | PA45 (L1 / L2/ L3/N/PE) |
| Power Connector Type | SB50 (HV+/HV-) |
| Low Voltage Connector Type | SB350 (LV+/LV-) |
| Signal Connector Type | 24Pin 5566 |
| Input power | 130kW |
| Feedback power | 100kW |
| Constant temperature range | Room temperature+5°C-60°C |
| Constant temperature accuracy | ±5°C |
| Number of temperature control points | 5 |
| Open type | Sliding door/folding door/side door |
| Volume size | 2100*1600*2050mm |
| Top floor height | 1450mm |
| Product area air duct direction | Left and right ventilation |
| Cooling method | Air cooling |
| Material | 1.5mm cold rolled sheet, epoxy sheet (laminate) |
Water
temperature
cabinet | Water temperature range | Room temperature+5°C-60°C |
| Water temperature accuracy | ±5°C |
| Water temperature | 8 |
| Number of serial products/way | 4/way |
| Water pressure range | 0.05-0.2MPa |
| Flow range | 3-15L/min |
| Channel diameter | 3/4 inch |
Monitoring
software | Display running information | Input voltage, current, power, output voltage(DC source module
communication or product communication) |
| Show status information | Not Connected / Vacant / Passed / Under Voltage / Under Current /
Over Voltage / Over Current /No Output / Protection |
| Bad way of reporting | Audible alarm |
| Report format | CSV format |
| Statistics | Yield/CPK/Time Distribution |
| MES docking | Support |
| Scan speed | 5S |
| Control cabinet | Control system | Window 10 |
| Display medium | Computers and Monitors |
| Manipulating medium | Mouse and keyboard |
| Communication method | Cable |
| Maintenance mode | Post maintenance |
| Material | 1.5mm cold rolled sheet |
| Volume size | 880*860*1900mm |
