| System | System structure | 1 control cabinet + 2 aging cabinets + 1 water temperature cabinet |
| Overall size | 6900*1600*2050mm |
| Total floor area | 6900*2500mm(Including operation area) |
| Total input voltage | Three-phase five-wire system 220Vac (rated) |
| Total input current | 250A |
| Total input power | 150kW |
| Application ambient temperature | 0-40℃ |
| Application environment humidity | 0-95% |
| Fire protection requirements | Materials meet UL 94V0 rating |
| Environmental requirements | Materials comply with Rohs, WEEE requirements |
| Safety requirements | Comply with IEC62368 international standard design requirements |
| Burn-in cabinet | Burn-in bits/cabinet | 16 bits/cabinet |
| Burn-in bits/layer | 4 bits/layer |
| Burn-in product power | 20kW/bit |
| Burn-in product input voltage | 150-1000Vdc |
| Burn-in product input current | 50A/bit |
| Burn-in Product Load Category | Inductive/Motor/AC Feedback Load |
| Burn-in product load current | 350A (inductor/motor)/40A (AC feedback load) |
| Auxiliary voltage of Burn-in products | 8-30Vdc |
| Auxiliary current of Burn-in products | 10A |
| Power Connector Type | SB50 (HV+/HV-) |
| Load Connector Type | SB350 (U/V/W/PE) |
| Signal Connector Type | 24Pin 5566 |
| Input power | 320kW |
| Feedback power | 256kW |
| Constant temperature range | Room temperature+5°C-60°C |
| Constant temperature accuracy | ±5°C |
| Number of temperature control points | 5 |
| Open type | Sliding door/folding door/side door |
| Volume size | 2100*1600*2050mm |
| Dimensions in the product area | 1700*550*1500mm |
| Product area layers | 4 |
| Bit space size | 425*550*350mm |
| Minimum floor height | 300mm |
| Top floor height | 1450mm |
| Product area air duct direction | Left and right ventilation |
| Cooling method | Air cooling |
| Material | 1.5mm cold rolled sheet |
Water
temperature
cabinet | Water temperature range | Room temperature+5°C-60°C |
| Water temperature accuracy | ±5°C |
| Water temperature | 8 |
| Number of serial products/way | 4/way |
| Dissipated power/circuit | 4kW/way |
| Cooling method | Chilled water or air cooling |
| Water pressure range | 0.05-0.2MPa |
| Flow range | 3-15L/min |
| Channel diameter | 3/4 inch |
| Volume size | 880*1000*1900mm |
Monitoring
software | Display running information | Input voltage, current, power, output voltage
(DC source module communication or product communication) |
| Show status information | Not Connected / Vacant / Passed / Under Voltage / Under Current /
Over Voltage / Over Current /
No Output / Protection |
| Display accuracy | ±(1%+0.2%FS) |
| Control precision | ±(1%+0.2%FS) |
| Bad way of reporting | Audible alarm |
| Report format | CSV format |
| Statistics | Yield/CPK/Time Distribution |
| MES docking | Support |
| Scan speed | 5S |
| Control cabinet | Control system | Window 10 |
| Display medium | Computers and Monitors |
| Manipulating medium | Mouse and keyboard |
| Communication method | Cable |
| Type of protection | Over current, leakage, over temperature, smoke, emergency stop |
| Alarm method | Sound and light alarm, remote network |
| Heat dissipation type | Air cooling |
| Maintenance mode | Post maintenance |
| Material | 1.5mm cold rolled sheet |
| Volume size | 880*860*1900mm |
