Pre-Shaded Multilayer Zirconia Block, 900MPa Strength & 0
Cytotoxicity, No Staining Required
Where Strength Meets Unmatched Translucency
Redefine aesthetic dentistry with SHT-ML – the high-translucency
zirconia engineered for demanding anterior applications.
Featuring 45% light diffusion and 900MPa flexural strength, this material eliminates the traditional compromise between
aesthetics and durability. With 9 optimized Vita shades
specifically designed for light-hue restorations, achieve perfect
color matching while reducing lab steps by 30%.
Material Science Innovation
Hyper-Translucent Matrix: 4Y-TZP dominant crystal structure
Nano-Grain Optimization: 0.3μm particle size distribution
Stabilized Yttria: 6.5-8.0% concentration prevents low-temperature degradation
Bio-Inert Surface: 0-level cytotoxicity (ISO 10993)
Clinical Performance
| Application | Industry Challenge | SHT-ML Solution |
|---|
| Thin Veneers | Margin chipping | 0.3mm edge stability |
| All-Ceramic Bridges | Flexural deformation | 0.02mm deflection at 150N |
| Implant Crowns | Titanium graying | 45% intrinsic masking |
| Discolored Teeth | Grayish gingival margins | Natural fluorescence effect |
Technical Superiority
| Property | SHT-ML | Conventional HT ZrO₂ |
|---|
| Translucency (1mm) | 45% | 35-40% |
| Aging Resistance | <5% monoclinic | 15-20% |
| Radioactivity | <0.1 Bq/g | 0.2-0.5 Bq/g |
| Sintering Tolerance | ±0.2% shrinkage | ±0.8% shrinkage |
Workflow Optimization
From Scan to Seat: 40% Fewer Steps
Milling:
25% faster machining
Minimal tool wear
Sintering:
Finishing:
Economic Impact
| Metric | SHT-ML Advantage | Value |
|---|
| Material Utilization | 92% efficiency | $18,500/year* |
| Staining Time | Eliminated | 2.1 hrs/case saved |
| Remake Rate | 0.4% | $32,000/year* |
| *Based on 500 discs/year production |
|
|
Zirconia Ecosystem
| Model | Flexural Strength | Translucency | Thickness | Clinical Focus |
|---|
| SHT-ML | 900 MPa | 45% | 10/12mm | Anterior aesthetics |
| ST-ML | 1000 MPa | 42% | 10-16mm | Full-contour crowns |
| ST-C | 1200 MPa | 35% | 14-20mm | Posterior bridges |
| MultiLayer Pro | 800-1100 MPa | 40-47% | 12-18mm | Gradient restorations |
Technical Support
24/7 Material Science Hotline
Digital Integration
Recommended sintering curve
(ST/ST-C/ST-ML/SHT/SHT-C/SHT-ML/UT-ML/3D-Pro-ML)
Sintering temperature of ST/ST-C/ST-ML/SHT/SHT-C/SHT-ML is from
1500℃ to 1530℃,you should make sure peak temperature at this range. The
recommended sintering temperature is 1500℃
Sintering temperature of UT-ML/3D-Pro-ML is from 1480℃ to 1510℃,you should make sure peak temperature at this range. The
recommended sintering temperature is 1500℃ |
|
|
|
|
|
