12 Inch Galvanised Solar Panel Screening Kit For Bird Protection

Quick details of Galvanised Solar Panel Screening Kit

• Galvanised steel Wire 0.7mm (14ga)
• PVC Coating surface treatment 
• Aperture: 12.7mm x12.7mm
• Colour: Black
• Wire thickness: 1.0mm ( after pvc coated)
• Mesh size: 12 inch width x 150ft length
• 150 pcs Metal J Pins and Self locking washers

Description of Galvanised Solar Panel Screening Kit

Our technicians use a UV-protected, coated galvanised steel weld wire mesh that is installed around your solar panels leaving no gaps for birds or pests to enter, without using screws or drilling holes. Solar Panel Screening Ki is tightly secured using a polycarbonate or stainless-steel clip which cannot be removed by birds or pests.

Metal weld wire mesh is bent around the perimeter of the panels after they are installed and fixed in place with plastic clips. The weld wire mesh provides a strong barrier, and can be made from either galvanised or, at slightly higher cost, stainless steel. An example system is the Bird Exclusion Mesh.

Installation guide for Solar panel screening kit

1. Cut the mesh to an appropriate size for your solar panel.

2. Use a piece of plywood to bend the solar panel bird mesh at a 45-degree angle so that it sits on the roof.

3. Attach a hook to the solar panel.

4. Place clips every 18inches.

5. Thread the hooks through the mesh.

6. Add a washer to the hook.

7. Slide washers down the hook.

8. Once all washers are added, slide them up against the solar panel bird mesh to secure.

9. Cut the excess portion of the hooks just past the washers to complete.

Common mesh size for Galvanised Solar Panel Screening Kit 

Common clips size for Galvanised Solar Panel Screening Kit