I. Core Parameters of Sintering Furnace Temperature Performance
• Rated Temperature: 1300°C (standard operating range)
• Maximum Temperature: 1500°C (short-term limit; material tolerance
must be considered)
• Usage Tip: Evaluate the lifespan of sintering plates and
refractory materials when exceeding 1300°C.
Furnace Structure
• Effective Dimensions: 400×330×800mm (W×H×D), suitable for small
to medium-sized workpieces.
• Sintering Plate: Made of corundum mullite, offering
high-temperature resistance and chemical stability.
• Refractory Materials:
◦ Inner Layer: Polycrystalline mullite (high insulation, thermal
shock resistance)
◦ Outer Layer: Ceramic fiberboard (lightweight insulation,
significant energy savings). Monitoring & Expandability
• Pre-installed thermocouple ports and temperature monitoring holes
support multi-point measurement or upgrades. Exterior & Color
• Dimensions: 850×900×1200mm, light gray casing (standard
industrial color).
II. Temperature Control Cabinet Configuration Temperature Control Channels
• 5+2 channel design: 5 channels directly connected to the furnace,
2 channels reserved (flexible expansion/redundancy).
• Instrument Count: 7 temperature controllers (independent control
per channel for precision). Control Instruments
• Models: Eurotherm 3504 or Japanese imports (international brands,
high reliability).
• Key Features:
◦ PID auto-tuning (automatically optimizes heating curves)
◦ High-temperature alarms, thermocouple failure alerts
(comprehensive safety)
◦ Power/voltage modulation (precise adjustments to minimize
fluctuations). Over-Temperature Protection
• Dual safeguards: audible/visual alarms + heating cutoff to
prevent equipment/workpiece damage. Exterior & Color
• Dimensions: 800×1850×500mm (vertical design, space-saving)
• Color: Light gray (matches the furnace).
| Item | pecifications | Quantity | Notes | | Kiln Main Unit | Primary heating system | 1 set | Core equipment for thermal process
| | Setter Plate | Material: Corundum-Mullite | 1 set | High-temperature resistant carrier |
- The equipment must be installed indoors, with an ambient
temperature range of -10℃ to 45℃. The indoor environment must be
free of flammable gases, corrosive gases, and vapors.
- The equipment requires a floor space of no less than 4 square
meters, with a working area length of at least 2 meters, width of
at least 2 meters, and height of no less than 3 meters. The
foundation must be sturdy and level, and the furnace weighs
approximately 400kg.
- The power supply for this furnace must be a three-phase five-wire
AC power line, with a voltage of 380±10% V and a frequency of 50±2%
Hz. This power line is dedicated, and high-power conversion
equipment such as welding machines, electric furnaces, and
metal-cutting machine tools should not be connected to this
distribution.
- The equipment must be reliably grounded.
|
