I. Equipment Name & Model: MBF64-11 Medium-Temperature Box
Furnace
II. Application Fields: Primarily used for degassing, sintering,
and curing processes of LTCC, glass, electronic components,
electronic ceramics, and similar products.
III. Technical Specifications & Basic Configuration
3.1 Rated Temperature: 1000°C;
3.2 Maximum Temperature: 1100°C;
3.3 Furnace Chamber Dimensions: 600×600×600mm (W×H×D);
3.4 Effective Dimensions: 400×400×400mm (W×H×D);
3.5 Heating Elements: FEC ceramic fiber heating plates;
3.6 Maximum Heating Power: 24kW;
3.7 No-Load Holding Power: ≤12kW;
3.8 Heating Rate: ≤6°C/min;
3.9 Heating Layout: Four-sided heating (top, bottom, left, right);
3.10 Temperature Control Points: Three independent control points
(front, middle, rear);
3.11 Temperature Control Stability: ±1°C, with PID parameter
self-tuning function;
3.12 Temperature Uniformity: ±3°C within the effective area (tested
at 1000°C with a crucible under constant temperature);
3.13 Thermocouple Type: K-type;
3.14 Temperature Control Instrument: Imported temperature control
module with PID self-tuning function;
3.15 Program Steps: 20 steps (can be adjusted according to actual
process requirements);
3.16 Exhaust Chimney: Exhaust port at the rear, manually adjustable
in size;
3.17 Sintering Atmosphere: Air;
3.18 Alarm Protection: Audible and visual alarms for
over-temperature, thermocouple breakage, etc., with power-off
protection for over-temperature;
3.19 Surface Temperature Rise: <35°C;
3.20 Equipment Weight: Approximately 600kg;
3.21 Equipment Exterior Color: Light gray;
3.22 External Reference Dimensions: 1090×1790×1095mm (W×H×D).Name & Model: MBF64
| Delivery List |
| Item | Note | QTY |
| Basic Compositions | Furnace |
| 1 PC |
| Certificates of Inspection | Furnace and major purchased components | 1 Set |
| Technical Documents | Furnace specifications, technical documents of major
purchased components, etc | 1 Set |
| Key Parts | FEC Heater |
| 1 Set |
| Temperature control module | Azbil | 1 PC |
|
|
|
| Spares | SSR |
| 1 PC |
Facility Requirements
1. Environmental conditions: Temperature 0 - 40ºC, humidity ≤ 80%
RH, no corrosive gas, no strong
airflow disturbance.
2. Process air conditions: clean, dry, oil-free compressed
air, pressure 0.2 - 0.4Mpa, gas
consumption 3 - 6m3 /h.
3. Ventilation system: non-contact access to the user pumping
system, pumping capacity is greater
than 10m3 /h;
4. Ground requirements: level, no obvious vibration, bearing
capacity > 500Kg/m2 .
5. Power conditions: capacity greater than 32kVA, 3 phases 5
lines, voltage 220/380V, frequency
50Hz(according to local situation). Live wire: yellow, green, red,
neutral wire: blue, ground wire: yellow-green;
6. Installation site: 2200mm×2000mm×2500mm (W×H×D),
installation area greater than 4.5m2.
Hefei Chitherm Equipment Co., Ltd. is an advanced equipment
supplier specializing in the research and development, design,
manufacturing, sales, maintenance, and service of high-, medium-,
and low-temperature industrial furnaces and laboratory furnaces.
Its product range encompasses bell furnaces, box furnaces, hot air
furnaces, vacuum furnaces, tube furnaces, mesh belt furnaces, bogie
hearth furnaces, rotary furnaces, roller hearth furnaces, and
pusher furnaces, which are extensively applied in fields such as
advanced ceramics, electronic components, thick-film circuits,
additive manufacturing, powder metallurgy, new energy, and
photovoltaics. These furnaces are suitable for thermal treatment
processes of materials including ITO targets, MLCC/HTCC/LTCC,
ceramic filters, magnetic materials, CIM/MIM, and lithium battery
cathodes and anodes, as well as various other new material
processes such as pre-sintering, dewaxing, degreasing, sintering,
drying, heat treatment, curing, and ceramization.
1.What products does Chitherm offer?
We provide customers with high-quality bell furnaces, hot air
furnaces, box furnaces, tube furnaces, vacuum furnaces, car bottom
furnaces, rotary kilns, mesh belt furnaces, and pusher furnaces.
2.What pre-sales services does Chitherm provide?
We offer timely consultation services to help customers select the
most suitable products, along with highly customizable solutions to
meet your specific requirements.
3.What are Chitherm's core strengths?
As a high-tech enterprise integrating R&D, manufacturing, and
sales, Chitherm possesses patented technologies and core resources
to deliver superior solutions.
