Widely used in high-temperature, high-cleanliness epoxy curing and
sintering processes for products such as electronic ceramics,
ceramic filters, magnetic materials, and electronic devices.
2. Mainly Specifics:
- Rated Temp: 1650ºC
- Max Temp: 1700ºC
- Furnace chamber dimensions: 480×390×540 (W×H×D);
- . Effective loading dimensions: 350×300×500mm (W×H×D);
- Heating element: U-shaped molybdenum disilicide rod;
- Cleanliness assurance: The inner chamber is constructed with
high-purity alumina foam ceramic to ensure cleanliness at high
temperatures;
- Temperature control stability: ±1ºC, with PID parameter
self-tuning function;
- Temperature uniformity: ±2.5ºC (tested at 1650ºC for 2 hours
under empty furnace conditions using a 9-point thermocouple ring);
- Temperature control thermocouple: Type B;
- Number of temperature control points: 1;
- Number of temperature control segments: 4×16 segments;
- Furnace atmosphere: Air;
- Exhaust chimney: Located at the rear of the furnace chamber,
with manually adjustable exhaust volume;
- Alarm protection: Audible and visual alarm protection for
over-temperature, thermocouple breakage, etc., with
over-temperature alarm and power-off protection function;
- Maximum heating power: 25kW;
- Empty furnace holding power: ≤10kW;
- Surface temperature rise: ≤40ºC;
- Equipment weight: Approximately 950kg;
- External dimensions: Approximately 1130×1950×1150mm (W×H×D),
excluding feet, chimney, and indicator lights;
3. Delivery List |
| Item | Note | QTY |
Basic Compositions | Furnace |
| 1 PC |
Certificates of Inspection | Furnace and major purchased components | 1 Set |
Technical Documents | Furnace specifications, technical documents of major
purchased components, etc | 1 Set |
Key Parts | Silicon-molybdenum rod | 6-12 U-shaped silicon-molybdenum rod | 1 Set |
Thermocouple | THERMOWAY, B Type | 1 PC |
Temperature control device | Shimadenhimaden | 1 Set |
Underglaze board | Corundum-mullite | 1 Set |
Spares | Silicon-molybdenum rod |
| 1 PC |
Underglaze board |
| 1 piece |
4. Facility Requirements
4.1 Environmental conditions: Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strong
airflow disturbance.
4.2 Process air conditions: clean, dry, oil-free compressed air, pressure 0.2 - 0.4Mpa, gas consumption 2 - 6m3 /h.
4.3 Ventilation system: non-contact access to the user pumping
system, pumping capacity is greater
than 10m3 /h;
4.4 Ground requirements: level, no obvious vibration, bearing
capacity > 300Kg/m2 .
4.5 Power conditions: capacity greater than 34kVA, 3 phases 5 lines, voltage 220/380V, frequency
50Hz(according to local situation). Live wire: yellow, green, red,
neutral wire: blue, ground wire: yellow-green;
4.6 Installation site: 2000mm×3000mm×1500mm (W×H×D), installation area greater than 3m2.
Hefei Chitherm Equipment Co., Ltd. is an advanced equipment
supplier specializing in the research and development, design,
manufacturing, sales, maintenance, and service of high-, medium-,
and low-temperature industrial furnaces and laboratory furnaces.
Its product range encompasses bell furnaces, box furnaces, hot air
furnaces, vacuum furnaces, tube furnaces, mesh belt furnaces, bogie
hearth furnaces, rotary furnaces, roller hearth furnaces, and
pusher furnaces, which are extensively applied in fields such as
advanced ceramics, electronic components, thick-film circuits,
additive manufacturing, powder metallurgy, new energy, and
photovoltaics. These furnaces are suitable for thermal treatment
processes of materials including ITO targets, MLCC/HTCC/LTCC,
ceramic filters, magnetic materials, CIM/MIM, and lithium battery
cathodes and anodes, as well as various other new material
processes such as pre-sintering, dewaxing, degreasing, sintering,
drying, heat treatment, curing, and ceramization.
1.What products does Chitherm offer?
We provide customers with high-quality bell furnaces, hot air
furnaces, box furnaces, tube furnaces, vacuum furnaces, car bottom
furnaces, rotary kilns, mesh belt furnaces, and pusher furnaces.
2.What pre-sales services does Chitherm provide?
We offer timely consultation services to help customers select the
most suitable products, along with highly customizable solutions to
meet your specific requirements.
3.What are Chitherm's core strengths?
As a high-tech enterprise integrating R&D, manufacturing, and
sales, Chitherm possesses patented technologies and core resources
to deliver superior solutions.