Electric Holding Furnace Chitherm Bf1500-15o 1500c High Temperature
Ceramic Sintering Bell Furnace for Precise Sintering 1. Application:
This equipment is mainly designed for electronic ceramic
materials, magnetic materials, ceramic filters, etc. require high
uniformity of temperature field or multi-species small batch
production occasions.
2. Technical Specification:- Rated Temp.:1400ºC
- Max Temp.:1500ºC
- Effective Dimensions:1600mm×1250mm×800mm(D×W×H)
- Heating Method: U-shaped silicon molybdenum heater
- Thermcouple: Type S
- Temperature Control: 6 Points
- Temp. Set Accuracy: ±1ºC(flat temp. insulation)
- Temp. Control Mode:control module imported from Japan with PID
- Heat-up Rate : ≤2.5ºC/min
- Temp. Uniformity: ± 5ºC (empty furnace insulation test 2hours under 1400ºC)
- Program Tracking Accuracy: ±2ºC (>600ºC)
- Furnace Surface Temperature ≤ 40ºC
- Maximum Lifting Trip:800mm
- Lift System: the equipment lifting operation system adopts
three-point control, which can be stopped at any time, with stable
and reliable operation
- Loading Weight ≤ 1000kg (with firing furniture and products)
- Atmosphere Control : four channels of air inlet, each channel of air flow is controlled by the glass rotor
flowmeter, single range of 12 ~ 120L / min
- Exhaust System : 2 exhaust chimney are set at the top with auto switch function
- Alarm System : with over-temperature, broken couple, overload, over-range,
deviation and other sound and light alarm protection function
- Maximum Heating Power:180kW
- Insulation Power:≤ 90kW
- External Dimensions: 3280×4600×2240mm(D×W×H) (without control cabinet)
- Appearance Color: Light gray
2. Delivery List| Table 1 Delivery list | | | Item | Note | Qty. | | Basic Components | Furnace | | 1 SET | | Inspection Certificates | Certificates of major outsourced components | 1 SET | | Technical Documents | Instructions, technical documents of the major outsourced parts,
etc | 1 SET | | Control Cabinet | 1000×2000×600mm(W×H×D) | 1 SET | | Key Components | Heating Plate | U-shaped silicon molybdenum heater | 1 SET | | Flow Meter | TOFCO | 1 SET | | Thermocouple | THERMOWAY | 1 SET | | Lifting System | | 1 SET | | Temperature Control Module | Azbil | 1 SET | | PLC | SIEMENS | 1 SET | | Touch Screen | MCGS | 1 SET | | Spare Parts | Heating Element | U-shaped silicon molybdenum heater | 1 PC |
3. Equipment Normal Operating Conditions- Environmental Conditions: temperature: 0~40ºC, humidity≤ 80%RH, no
corrosive gas, no strong airflow disturbance;
- Atmosphere Conditions: dry, clean, oil-free compressed air, working
pressure of 0.4- 0.8MPa, gas consumption of 30 - 90 m3/h;
- Ventilation System: non-contact access to the user pumping system,
pumping capacity is greater than 100 m3/h
- Ground Requirements: horizontal, no obvious vibration,
load-bearing> 600 Kg/m2;
- Power Condition(TBD): capacity > 240kVA, 3-phases 5-lines, voltage 220 / 380V, frequency 50Hz. Fire
line: yellow, green, red, Zero line: blue, Ground line:
yellow-green;
- Installation Site: 4000mm×4000mm×5000mm(D×W×H), with an installation area greater than 20m2.
|
