51 - 60 of 112
pneumatic shoe sole press machine
Selling leads
|
... shoes, and high shoes. 2.Plastic or rubber outsole can be used. . This machine is designed with the principle of gas pressure profiling and ...
2025-08-02 00:23:11
|
|
...shoes lasting the sole attaching, especially for the cold attaching of casual shoes, sports shoes, and high shoes. Plastic or rubber outsole can be ...
2025-08-02 00:23:11
|
|
.... Flat bottom, hemming and special hemming design shoes can be operated and used. One machine is multi-purpose, suitable for various shoe types, ...
2025-08-02 00:23:11
|
|
Features: 1, Machine is hydraulic system. 2, Pressing time is around 5S-10S. 3, Oil capacity: 25kgs. 4, Easy to operate. 5. The distance of the ...
2025-08-02 00:23:11
|
|
...improve the capacity more. ▶Usually the pressing time is about 10 seconds, can also adjust the pressing time according to requirements. ▶The height ...
2025-08-02 00:23:11
|
|
Features: 1. The machine has two special heating function to reactivate the upper and sole. 2.Working in manual or automatic system as required by the ...
2025-08-02 00:23:11
|
|
...shoes and soles are bent at a certain angle for a certain number of times, the damage of the shoes and soles is observed, or the extent of cracks ...
2025-08-02 00:23:11
|
|
Features: 1. Adopting column slide rail makes a steady pressing motion to reduce damage to the parts. 2. The upper press plate goes downward with two ...
2025-08-02 00:23:11
|
|
..., etc. ▶ The pressure of the machine can be adjusted by the cylinder. ▶ The temperature and press time can be adjusted according to the materials ...
2025-08-02 00:23:11
|
|
... middle-sole and rear quarter of soft insole with back heel height below 180mm. 3.It is equipped with different flattening molds and which can ...
2025-08-02 00:23:11
|