High-strength Hot-rolled H-shaped Steel Structure Three-dimensional Parking Garage Building

High-strength hot-rolled galvanized H-shaped steel structure three-dimensional parking garage building

​

​The steel structure parking lot takes low-alloy and high-strength steel as the core framework, and realizes the efficient construction of large-span cantilevers and multi-layer three-dimensional spaces with its lightweight and high-strength characteristics. Standardized steel beams and steel columns are quickly connected by bolts, with modular design, which can not only create an open column-free large space to meet the smooth entry and exit and parking needs of large vehicles, but also flexibly combine into a multi-layer three-dimensional structure, make full use of vertical space, and increase land utilization by 3-5 times. The precision of prefabricated components in the factory is up to millimeter, and the on-site assembly construction period is shortened by more than 50% compared with traditional concrete structures, effectively reducing construction noise and dust pollution. The surface of the steel is protected by hot-dip galvanizing and fluorocarbon coating, with superior corrosion resistance, and is suitable for complex environments such as outdoor acid rain and salt spray. Combined with the earthquake-proof and windproof design, it can resist strong winds and earthquake impacts, and ensure the safety of vehicle parking.

The steel structure parking lot adopts a prefabricated assembly mode, and the steel beams, steel columns and other components are transported to the site for assembly after high-precision processing is completed in the factory. With the help of BIM technology, accurate modeling and pre-assembly simulation are used to ensure zero error in component installation, and the construction period is shortened by more than 60% compared with concrete structures. The on-site operation is mainly dry installation, reducing wet work and concrete pouring, which not only reduces noise and dust pollution, but also greatly reduces the generation of construction waste, which is in line with the concept of green construction.

With the mechanical properties of high-strength steel, the steel structure parking lot can build a super-large span column-free parking space, with a single span of more than 30 meters, reducing the obstruction of columns, and making it more convenient and smooth for vehicles to enter and exit and turn. At the same time, the steel structure is convenient for creating a multi-storey three-dimensional parking structure, and through reasonable design, the vertical direction can be expanded by 3-5 floors, compared with the traditional single-storey parking lot, the land utilization rate is increased by more than 300%, effectively alleviating the problem of urban parking land tension.

The low-alloy high-strength steel selected for the steel structure has a yield strength of more than 345MPa and a tensile strength of more than 490MPa. The surface is hot-dip galvanized and then sprayed with anti-corrosion coating, which can effectively resist rain and ultraviolet erosion, and can still have a service life of up to 50 years in extreme environments such as high salt spray along the coast and severe cold in the north. In addition, the materials used in the steel structure parking lot are non-combustible, with fireproof coating treatment, and the fire resistance level is high, providing reliable safety guarantee for parked vehicles.

Our advantages

1. We have a professional team of designers to provide design drawings that satisfy you.
2. The factory processes high-quality steel structure materials and packages them for delivery.
3. steel structure products have the advantages of light weight, high strength, good seismic performance, and short construction period.
4.During construction, construction time and costs can be reduced due to the use of steel structures that can be assembled quickly, resulting in shorter delivery times for construction projects.

Company Profile

Shandong Chentai Steel Structure Co.,Ltd of BY GROUP is a comprehensive industrial group integrating for steel structure design, manufacture and installation. We have estabulished over 15 years. Our factory is covering about106,5 60 square meters.

Main products: steel structural warehouse, workshop, high rise steel building, school, hotel,office building, exhibition building, show room, shopping mall, stadium,Agricultural project (stable/cattle barn, poultry house,pig house), car parking, hangar,shed,storage room, prefab house, container house, Sandwich panel,corrugated steel sheet, C&Z sec- tion steel, door and windows and cranes.

Export experiences: products have been exported to over 80countries. such as: Germany, Japan, American,Australi- an,Philippines, Korea,Canada,Vietnam,Cambodia,Malaysia,Brunei, Indonesia, Sri Lanka,Maldives,Tajikistan, Uzbe- kistan,Iran, Syria, Jordan, Lebanon, Israel,, Qatar, Oman, Yemen, Cyprus, Spain ,Egypt, Sudan, Algeria, Ethiopia, Kenya, Tanzania, New Zealand,Papua New Guinea, Fiji Islands, Tonga, Cook Islands (New), Guam (United States), New North America: Mexico, Honduras,Nicaragua,Costa Rica, Panama Netherlands,South America, Colombia,Venezuela, Russian, American,South American, French, Middle east, South African, India, Brazil, other Africa countries and so on. Certificate: Our products have passed the third party test and inspection such as CE, SGS, BV Lloy'd.

Engineers team: We have over 20 engineers. We Can make design according to Clients requirement. We fabricate the products according to the clients design.We will consider all the technical information requirements and fabrication requirements from our clients When we make the design.

Packaging & Shipping

1. All standard components are packed in plywood box.
2. All steel structure weld components are packed with blanket or bubble-wrap to avoid scratch during loading and unloading.
3. All steel structure are packed in steel pallet together into container, much save loading and unloading time, labor cost.
4. All sandwich panel are packed in steel pallet.
5. Material components will be made container load plan, also make regional unloading plan to avoid retransport on site.
6. All equipment pasted with English lable
7. Small equipment will packed in carton or plywood box

FAQ

Q: Are you a factory or trading company?
A: We are a manufacturing factory, we can provide one-stop service for customers. You can get the best service and competitive prices.

Q: How can I get a quote for a project?
A: You can contact us via email, phone, Trade Messenger, WhatsApp, Skype, Viber, etc., and we will get back to you as soon as possible.

Q: Do you accept container loading inspections?
A: You are welcome to send inspectors to visit the factory, not only at the time of loading, but also at any time. If it's not convenient, we also provide real-time video display.

Q: Do you provide design services?
A: Yes, we can design complete solution drawings according to your requirements. They use software such as Auto CAD, PKPM, MTS, 3D3S, etc.

Q: What's the payment terms?
A: Payment terms: T/T, L/C, other payment methods can be negotiable

Q: What's the delivery time?
A: The delivery time depends on the order quantity.