High Precision Online Ccd Visual Smt Pcb Automatic Uv Underfill
Glue Dispenser Dispensing Machine Robot DescriptionThe dispenser mainly includes the following aspects: Fixed electronic components: a dispenser can be used to fix the
contact parts of electronic components on a fixed circuit board,
such as diodes, chips, and inductors, as well as the wiring harness
and interface. Fusing small products: it is often used to glue all kinds of small
products, such as some parts of toys, some modules of electronic
products, product trademarks, and some decorations. Circuit board coating: apply glue to cover a circuit board to make
it waterproof, dustproof and heat-dissipating, usually for
small-area products. Encapsulation application: seal whole or part of a product with
glue, such as the encapsulation of battery, diode, Chip, and
circuit board. Application: pour glue into your product to protect your internal
equipment and to prevent water and heat, such as the Charger's
charging head, or a new-energy car battery case. Application: use the dispenser to color products. It is widely used
in the fields of craft jewelry, medal insignia and precision
hardware. Application: it is mainly used in crystal and epoxy. By dripping,
you can increase the volume and gloss of your products and protect
them.
D-series glue dispenser has advanced design suitable for various
production environments, and has obvious advantages of high cost
performance. Comprehensive configuration to meet the dispensing
needs of substrates and substrates of different specifications.
Adopt non-contact injection valve to ensure the uniformity of
dispensing, increase productivity and save material loss. Combining
various dispensing technologies to customize personalized solutions
for customers. Comprehensive Ability Minimum point diameter: 0.2mm Minimum wire diameter: 0.25mm Overflow width: 0.1mm Minimum dispensing volume: 2nl
Product Specification| Type | D450S | | Overall Machine Size | L950*W1200W*H1600(MM) | | Control Method | PLC + motion control card | | (xyz) Dispensing area | X=450mm Y=450mm Z=50mm | | Drive method | Scrvo motor + ball scrcw (optional linear motor) | | Max. running speed | 1000mm/S | | Positioning accuracy | ±0.02mm | | Repeat positioning accuracy | ±0.02mm | | Nozzle matched | 1 set (lt is equipped with double standard valve, and can be
equipped with doublevalve). | | Nozzle heating | Ambient Temperature-~100℃ | | Communication port | SMEMA | | Scanner port | 232 port | | Programming mode | offline or online visual programming | | Input voltage | 220V 50/60HZ | | Air input | 0.6MPa | | Total Power | 2.4KV | | Total weight | 650KG | | Optional Items | | Nozzle | Pneumatic injection valve, pressure point injection valve, screw
valve, etc. | | Analytical balance | Date Dreading accuracy 0.001mg | | Laser height measure | Automatic Laser height detection can automatic z-axis height after
deformation. if component deformation. | | Work piece heater device | Working zone heating, ambient temperature -120°C ± 0.3°C |
Product details |
