Automated Insertion Equipment motorized Smt Equipment with bearing
Supported THT Machine and high precision DIP Insertion Pick And
Place Machine IST-4800 For DIP Producton Line Product Introduction1. The value with (*) conforms to the JIS standard. The rest are in
accordance with Panasonic specifications.
2. Use the above dimensions when using sequential tape
weaving.
3. Tin plating pin wire (tin content is more than 95%).
4. This is discussed separately when the element is inserted at a
distance of 5 m from the 52 m tape.
5. 52 mm special component feeder 51 + 2.5 is required when the W
dimension of 52 mm braided belt is negative tolerance.
6. Do not use 52 mm special component feeder when the W dimension
of the tape is positive tolerance, 51 + 2.5 this may increase the
center slip.
7. For fragile components such as glass diode, the central
positioning clip cannot be used.
8. When the insertion span is less than the element slip tolerance,
the fragile element can be inserted even without using the center
positioning clip. (when using 52 mm special
component feeder)
9. The edge shape of the component may affect the center
positioning. 10. The maximum length of the part body is 15 m. If
the length exceeds 15 mm, please contact us. 11.U size
(U=S+T+W+T+S) should be set below 39.5 mm and 52 m for 26 mm.
Please set it below 65.5 mm Product Specification| IST-4800 | | | Theoretical velocity | 24000 CPH/hour | | Plug-in direcfion | Parallel O degrees,90 degrees,180 degrees,270 degrees (Optional 360
degree model) | | Component span | Double hole distance 5mm-22mm | | Substrate stze | 340*280(larger sizes can be austomized) | | Substrate thickness | 0.79-2.36mm | | Component type | Capacitor,transistor,diode,resistance,fuse,etc. | | Jumper(JW) | Independent transportation mode.Diameter 0.5mm-0.8mm tinned copper
wire | Length of component lead shearing
foot | 1.2mm-2.2mm(adjustable) | | Component lead bend foot angle | 5-35 degrees(adjustable) | Equipment shape size
(length Xwidth X height) | Host:1800mm*1700mm*1680mm 6Position stations:1200mm*960mm*1500mm
20Position stations:
1900mm*960mm*1500mm | | Machine weight | Mainframe welght 1200kg;material stafon weight:800kg | | Use power /power | 220V,AC(single phase)50/60HZ,1.5KVA/1.6KW(energy saving type) | | System prolecfon | Built-in soft protection | | Use of air pressure /gas | 0.4-0.6Mpa/0.3 cubic/minute(dry gas) | | Use of ambient temperature | 5-25 degrees | | Hole posinion correction mode | Machine vision system,mutti-point MARK vision correction | | Drive system | AC马达AC servo,AC motor | | Data input mode | USB interface input(EXCEL document fomat) | | Contol system | Chinese operating interface(Win7 system control platform)liquid
crystal display | | Working mode of worktable | Clockwise and counterdockwise | | Cirauit board transportation mode | Automaic,left to right,nght to lett oplonal |
Applications:Widely used in electronics manufacturing, consumer electronics,
automobile electronics, communications equipment, aerospace,
medical equipment, LED lamps, computers and peripherals, smart
home, smart logistics, miniature and high power ratio electronic
devices. |
