SMT Loading And Unloading Rack 460*400*563mm

SMT Loading And Unloading Rack 460*400*563mm Product Image:

Product Installation Steps:
1. Take out the accessories and check if they are all present.
2. Press down the gear bar firmly.
3. Secure the four vertical columns with screws.
4. Align the side plates with the holes and tighten the screws.
5. Align the bottom of the movable side plate with the circular holes of the clips.
6. Install the base plate, push the round heads of the clips upwards and then move it.
7. Install the stopper on the spring part downwards, and the installation is complete.