8 Channel 400W Counter Anti Drone Uav Fpv Defence System With DJI
Drone Decoding With the rapid development and popularization of drone technology,
drones have shown great application potential in aerial
photography, agriculture, rescue, security and other fields, but at
the same time they have also brought increasingly serious safety
risks. Incidents such as illegal intrusions, malicious
reconnaissance, and privacy violations occur frequently, posing
serious threats to national security, public safety, and personal
privacy. Therefore, the development of efficient and advanced drone
jamming technology has become an urgent need to maintain airspace
security and ensure social stability. The key advantages include: - AOA Proprietary logarithmic antenna calculation method for precise
FPV direction finding.
- The protocol cracking/decoding range is significantly extended,
with Remote Id (Drone ID) detection distance of up to 15
kilometers.
- Utilizing proprietary SDR signal control technology to effectively
allocate and transmit active white noise across targeted frequency
bands.
Specs - Detection range: In an interference-free environment, signal
reception range maybe vary when different antennas are used. the
range of detection can up to 10km.
- Detection spectrum bandwidth: 70 MHZ - 6GHZ, focus on the 433Mhz,868Mhz,915Mhz,2.4Ghz,5.2Ghz,5.8Ghz；
- FPV Detection:300Mhz-6.2Ghz Analog Signal of FPV Drones,range up to 1-3km
- Drones Location:For UAVs with Remote ID (China GB42590-2023, US
ASTM F3411-22a, EU ASD-STAN PrEN4709-002) and Drone ID (such as DJI
Mavic2, Mavic3, air3s, Matrice4, etc., some require network
decryption), it can parse detailed information such as drone
location and pilot location up to 3-5km.
- Identify Range: LightBridgel, LightBridge2, Ocusync 1,2,3, WIFI and
WIFI variant protocols, Zigbee, Bluetooth and other customized
protocal of small brand, can identify UAV brands and models;
- The trajectory: have the function for tracking flight trajectory.
- Accurate recognition: it can accurately identify UAV model and
electronic fingerprints (ID),≧ 400 different uavs models and the
corresponding ID (identity) can be identify at the same time.
- Detection Angle: 360 °
- Detection number of UAV : ≧150pcs
- The lowest detection height: ≤0 meters
- Detection rate: ≧99.9%
- Broadband Jamming: 800-900Mhz1.2Ghz1.5 GHz2.4 GHz5.1-5.2GHz5.8GHz
- [NOTE: The Systemcan be customize with 8-10 frequency, Ex:
433Mhz800-900 MHz; 1.2Ghz; 1.4Ghz; 1.5 GHz; 2.4 GHz; 5.1-5.2GHz;
5.8GHz]
- support at the level of effective interception Angle range in a
straight line dive and turned to flight of UAV, intercept distance:
2km;
- power supply mode: 220 V±10V
- Protection grade: ≧IP65
- Working temperature: - 40 ℃ ~ + 55 ℃
Key Product Features | Function | Descriptions |
|---|
| UAV detection | - Detection spectrum bandwidth: 70 MHZ - 6GHZ, detection focus on the
433Mhz,868Mhz,915Mhz,2.4Ghz,5.2Ghz,5.8Ghz
- FPV Detection:300Mhz-6.2Ghz Analog Signal of FPV Drones
- Simultaneous screening number of UAV: ≧150pcs
- The lowest detection height: ≤0 meters
- Detection rate: ≧99.99 %s
| | Drones Location | - Remote ID (China GB42590-2023, US ASTM F3411-22a, EU ASD-STAN
PrEN4709-002)
- Drone ID (such as DJI Mavic2, Mavic3, air3s, Matrice4, etc., some
require network decryption), it can parse detailed information such
as drone location and pilot location.
| | White and Blacklist | - The System can identify ≧ 400 different model UAV including DJI
series drones,and it has the autonomous learning ability.
- The System can carry on the accurate identification of target,
in-depth analysis of UAV signal, the identification of unique ID,
and the black and whitelist to distinguish.
- Whitelist and a blacklist can be set for different targets of the
same position, same frequency band, same manufacturer, same type of
UAV respectively.
| | Defensive Interference | The System has interference capabilities of 900MHz, 433Mhz; 1.5ghz,
2.4ghz, 5.8ghz; 5.2Ghz and other customized frequency bands, and
covers most of the UAV communication available in market. | | Remote OAM | After turning on the fully self-movable defense, it can enter
unattended mode, detect, and strike autonomously. And a variety of
OAM features are available when used with the remote server,
including firmware updating, resetting, status inquiry,
self-testing, parameter configuration, and more. | | GPS | The System can detect its current position using its built-in GPS. | | Networking | The System can network multiple devices through the cloud server,
observe the online/abnormal status of each device, and control the
device remotely through the mobile terminal (mobile phone IPAD),
including but not limited to viewing the operating interface of the
device system, receiving alarm information, viewing the black and
whitelist, and turning on defense functions. | | Data security | Use certificate management and data encryption between the
equipment and server to ensure data reliability and security. |
System Interface Display: The intuitive drone detection interface presents real-time
situational awareness in a clear and operator-friendly layout. On
the right-hand side, a dynamic list displays key information for
each detected drone, including its current altitude, flight speed,
precise latitude and longitude coordinates, and a unique SN (serial
number) for reliable identification. This structured presentation
allows operators to quickly assess multiple targets at a glance,
distinguish individual drones, and make timely, informed decisions
during monitoring and response operations. |
