4G And 5G Terminals Cell Phone Detector Can Collect IMSI
Information And Locate Introduction The 2km Lightweight Design Cell Phone Detection Drone
Detector With Voice and Vibration Alarm is a compact and portable
UAV detection device designed for ease of use. With its lightweight
build and advanced detection capabilities, it accurately identifies
UAV signals in various environments. Ideal for professional and
personal applications, it ensures reliable performance with
user-friendly operation. Basic | Name | 4G+5G micro-positioning Pro | | Model | LTE8B2C-NR6B2C-5W | | Applicable network | Mobile, Unicom, Telecom, Radio and Television, 4G, 5G network (SA,
NSA) | | Working mode | Active direct purchase | | Number of carriers | LTE dual carrier + NR dual carrier | | Supported frequency bands | TE-Cell 1: B1B5B8B39B40B41; | LTE-Cell 2:B3B34B40B41; | | | N R-Cell 1:N1N3N41N78N79; | NR-Cell 2:N28N41N78N79; | | | Frequency hopping time | Switching time <1S, frequency hopping cycle can be configured | | Frequency sweeping and frequency matching | Supports power-on frequency scanning and automatic frequency
matching, supports manual addition and deletion of frequency points | | Working bandwidth | 4G: 5M, 5G: self-adaptive 10M, 20M, 40M | | Antenna | Built-in directional antenna, multiple arrays, gain 8dBi | Maximum transmit power (antenna port) | N41/N78 5W/carrier N28/79, 1W/carrier, other frequency bands 2~5W/carrier, | Transmit power (antenna port) | 3 levels adjustable, each level differs by 3dB | | Receive sensitivity | -102dBm | | Synchronization method | GPS, air interface synchronization | | Positioning distance | 1~500 meters (depending on the current network strength of the
target and whether there are any obstructions) |
Interface Definition Serial number | Name | Silkscreen | Remarks/Instructions | 1 | Power supply interface | DC20V | Main view: left GND, right DC-20V | 2 | Power switch | PWR-SW | Long press “on”, long press “off” | 3 | Wired communication port | LAN | (USB-Type-C), do not use it as a power supply port, after the
device is powered off and restarted, you need to unplug the data
cable again to connect normally; | 4 | Synchronization indicator | SYNC | After the synchronization clock is locked, the light is always on | 5 | Running Indicator | RUN | After the program is normal, the light flashes | 6 | 433M digital transmission | 433M | Need to combine with the digital soldier, digital transmission with |
|
